Results 1 to 10 of 87
Like Tree248Likes

Thread: Any Advice will be gratefully received

Hybrid View

  1. #1
    Skeptical Member Gasman's Avatar
    Join Date
    Nov 2016
    Location
    Colorado Springs
    Posts
    10,554
    Thanked: 2195

    Default

    I had the issue of red cheeks when i started. Too much pressure with the beginning of the stroke was part of it, the main issue was the angle at the first move. Too much. It was causing a shearing of the whiskers and not smoothly cutting.

    Water is good and a little more would help ya. I dont sweat getting water on scales and pins. I dry it when im done and i will repin if i need too. Then grab the mop to clean up the floor. Lol.

    Keep it up and work on controlling your strokes more. A little longer pull slowly will cause less irritation.
    Phrank likes this.
    It's just Sharpening, right?
    Jerry...

  2. The Following User Says Thank You to Gasman For This Useful Post:

    STF (10-28-2019)

  3. #2
    STF
    STF is offline
    Senior Member blabbermouth STF's Avatar
    Join Date
    Oct 2019
    Location
    Kingsville On, Canada
    Posts
    2,435
    Thanked: 207

    Default

    Quote Originally Posted by Gasman View Post
    I had the issue of red cheeks when i started. Too much pressure with the beginning of the stroke was part of it, the main issue was the angle at the first move. Too much. It was causing a shearing of the whiskers and not smoothly cutting.

    Water is good and a little more would help ya. I dont sweat getting water on scales and pins. I dry it when im done and i will repin if i need too. Then grab the mop to clean up the floor. Lol.

    Keep it up and work on controlling your strokes more. A little longer pull slowly will cause less irritation.
    Thanks Jerry,

    Makes sense, I’ll use more water and longer strokes with less pressure at the start.

    Steve
    - - Steve

    You never realize what you have until it's gone -- Toilet paper is a good example

  4. #3
    STF
    STF is offline
    Senior Member blabbermouth STF's Avatar
    Join Date
    Oct 2019
    Location
    Kingsville On, Canada
    Posts
    2,435
    Thanked: 207

    Default Hoping for your advice

    I have just found this on ebay.

    I don't know much about SR yet.

    Is this worth considering?
    https://www.ebay.ca/itm/Vintage-Stra...EAAOSw9G1drle~

    Thanks.

    Steve
    - - Steve

    You never realize what you have until it's gone -- Toilet paper is a good example

  5. #4
    Skeptical Member Gasman's Avatar
    Join Date
    Nov 2016
    Location
    Colorado Springs
    Posts
    10,554
    Thanked: 2195

    Default

    If it stays in your price range it is a nice razor. I wouldnt call it special but decent. JMO.
    It's just Sharpening, right?
    Jerry...

  6. The Following User Says Thank You to Gasman For This Useful Post:

    STF (10-28-2019)

  7. #5
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,638
    Thanked: 3751

    Default

    Quote Originally Posted by STF View Post
    I have just found this on ebay.

    I don't know much about SR yet.

    Is this worth considering?
    Bit of a gamble. Looks like it has some pitting that's been cleaned up. If it extends to the edge could be a problem otherwise seems to have had little use.
    rolodave, BobH, RezDog and 3 others like this.
    The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.

  8. The Following User Says Thank You to onimaru55 For This Useful Post:

    STF (10-29-2019)

  9. #6
    MrZ
    MrZ is offline
    Senior Member
    Join Date
    Sep 2017
    Location
    Upstate New York
    Posts
    641
    Thanked: 104

    Default

    I would say not to make so many passes with your razor. You arent getting graded on this. A nice comfortable, close shave is enough for me. You dont need four passes and a BBS shave. Most of mine are simple two pass shaves with the grain. It gets me nice and clean without all of the fuss. I am also a one hand shaver. No shame in using only your dominant hand, you just have to use some strange razor positions, but eventually you get good at it.

  10. The Following User Says Thank You to MrZ For This Useful Post:

    STF (10-29-2019)

  11. #7
    Senior Member blabbermouth
    Join Date
    Feb 2018
    Location
    Manotick, Ontario, Canada
    Posts
    2,812
    Thanked: 562

    Default Great info on lathering

    Just spotted this page on the Mystic Water website. It has some very good info on lathering effectively.

    https://www.mystic4men.com/lathering-instructions.html
    STF likes this.
    David
    “Shared sorrow is lessened, shared joy is increased”
    ― Spider Robinson, Callahan's Crosstime Saloon

  12. The Following User Says Thank You to DZEC For This Useful Post:

    STF (11-08-2019)

  13. #8
    Senior Member blabbermouth
    Join Date
    Apr 2012
    Location
    Diamond Bar, CA
    Posts
    6,553
    Thanked: 3215

    Default

    Is this worth considering?

    I know the auction has ended, but here are a few tips to look for when buying vintage razors.

    First the seller says the razor was cleaned, it is not clean, so I would doubt anything the seller says, if he thinks that razor is “clean”

    The razor has pitting, something is going on at the spine on the face side, probably pitting that has been cleaned up, not very well.

    Those scales are notorious for cell rot, be very careful purchasing a razor with those type of scales. That it appears to be pitted and with notorious scales, 2 big red flags. Blurry photo are another red flag, now days there is not reason for blurry photos, any current phone can take excellent crystal clear photos, blurry photos say a lot about the seller.

    Copy the photos to a photo editor and enlarge the photos, take a look at the edge, shave ready?

    It is not an unusual or collectable razor.

    When you start to build a collection have a plan, buy a brand, a style or size, and try not to buy cheap random razors. Buy quality, in the best condition you can afford. It is better to spend a few dollars more for a collectable razor, in the best condition and from a known vendor, that is truly SHAVE READY and will stand behind the razor and the edge.

    There are many great razors in the BST. There are millions of razors in the wild, there is no rush or limited supply.

    Name:  s-l500 (1).jpg
Views: 120
Size:  21.9 KBName:  s-l500.jpg
Views: 187
Size:  22.4 KBName:  s-l1600 (2).jpg
Views: 118
Size:  32.4 KBName:  s-l1600.jpg
Views: 137
Size:  42.7 KB
    rolodave likes this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •