Thread: Razor Differences

The fun of straight shaving is collecting and getting to experience a variety of different blades, finding out what you like. This is how RAD begins and there is no known cure.

Xel, I feel for ya.

Some of the reason you want to be so 'right' about the first purchase is 'cause you imagine it'll go to your grave with you. In truth, you have to experience the feel of the different sizes, grinds, steels to see what your combination of skin/beard/technique prefer. When you start, any quality blade with any quality edge will suffice. Why? 'Cause for months, you're still learning the shave and learning your facial topography. You try all kinds of facial expressions combined w/ strange stretching contortions until you learn what stretch and stroke work w/ your beard. This doesn't require the 'perfect' razor - just a good one (which can also be quite inexpensive - leaving you w/ funds to explore further). Once comfortable w/ the shave, connect w/ other members, get together, try each other's gear and you learn ALOT without going broke. Yes, many aren't afraid to spend for their 'ultimate' blade, but its gonna be quite a while before you have any idea what that would be. By spending humbly but well, you can learn and keep funds in reserve as you discover other blades that you like the feel of.

If your travels take you anywhere near the Portland, OR area, contact me. Come over & try lots of gear.

I have to say, no matter how specific you get, there is never a real answer. For example, my stubble is relatively average (not super thick or coarse and not very light and girly) and a lot of similar guys like very hollow blades. I see a lot of guys with thick, coarse stubble who prefer heavier grinds.

I tend to prefer a mid size (6 or 7/8) razor with a thick grind for some reason. Other guys may like an 8/8 full hollow. Who really knows why? There are too many factors that go into finding the right razor. Heck, even the examples I used are very general - I'm sure there are lots of guys with beards made of steel wool who prefer a 4/8 super hollow too.

Thanks for the responses. I wasn't asking what the best razor is, or which I should buy; I was asking about the specifics of some of the major brands. Does Dovo really have nothing specific to the brand as compared to TI, for example? Better or worse built? Generally lighter in the hand or heavier? Uses steel that takes a hone better, worse than, or the same as? The point of my question is this - the fact that people have preferences mean that there ARE differences in the blades. Many people that I've talked to have some brand loyalty, such as "I absolutely love TI razors". What I'm looking for in this thread are the qualities that would make a person say that. I know a lot of it is feel, but since we're men here and technically don't have feelings, there has to be something about the blades specifically that a person likes or that define the brand.

Originally Posted by Xel

Thanks for the responses. I wasn't asking what the best razor is, or which I should buy; I was asking about the specifics of some of the major brands. Does Dovo really have nothing specific to the brand as compared to TI, for example? Better or worse built? Generally lighter in the hand or heavier? Uses steel that takes a hone better, worse than, or the same as? The point of my question is this - the fact that people have preferences mean that there ARE differences in the blades. Many people that I've talked to have some brand loyalty, such as "I absolutely love TI razors". What I'm looking for in this thread are the qualities that would make a person say that. I know a lot of it is feel, but since we're men here and technically don't have feelings, there has to be something about the blades specifically that a person likes or that define the brand.

What you're asking can't be categorized in a quantitative fashion, at least not objectively. Every "favorite razor" thread, or even brand loyalty for that matter, is totally subjective; there are just too many personal preferences involved. Generally speaking, any brand of razor in the wiki database is considered good-to-excellent, meaning they are made of good steel, will hold an edge, have collectors value etc, which are the reasons why we like them. Sorry if that's not what you wanted to hear, but it's the truth.

+1

for newer razors it can be argued that the price point matters. You shouldn't expect the same quality from a $90 Dovo that you'll get from a $500 TI Oak Wing.

I think within respective price points of current manufacturers, though, that the main differences are aesthetic. I wouldn't say Dovo is any worse than TI in terms of shave quality. I have heard that Dovo is a little lacking in their quality control and some razors have flaws but you may find the same things in TI razors, I can't say for sure.

I would personally opt for Thiers Issard simply because I like the look of their razors. If Dovo produced the same exact model, it'd be hard to choose.

also, I agree. Men do not have feelings.

And it follows that simply put, peoples' tastes change. I know when I began shaving I moved down for a while, going from a 6/8 full-hollow to a couple of various grinds in the 5/8 range. I then tried a 4/8 and I found it pleasurable enough to shave with. But, as of late, I have found a real fondness for big, hefty razors; those big guys in the 7/8 and 8/8 range that you either love or hate. I think for me it really has to do with the less pressure, or force used when shaving. Instead, the weight of the bigger bugger really does a lot of the work. And, I'm kind of the opinion that with less pressure you're really treating the skin of your face a bit more kindly. Hate to get off point gentleman...but you just kind of got me thinking.

There are huge differences in the attributes of Vintage and New razors, luckily there are also huge differences in our faces

What do you like better Blondes, Brunettes, or Redheads???? why????


Having been pretty lucky over the last 30+ years to hone and shave just a few razors I still couldn't tell you what would be the best for you, I know exactly what I like and why but it doesn't mean you will...

Hakunna Matata or on SRP we say YMMV

Originally Posted by Xel

Thanks for the responses. I wasn't asking what the best razor is, or which I should buy; I was asking about the specifics of some of the major brands. Does Dovo really have nothing specific to the brand as compared to TI, for example? Better or worse built? Generally lighter in the hand or heavier? Uses steel that takes a hone better, worse than, or the same as? The point of my question is this - the fact that people have preferences mean that there ARE differences in the blades. Many people that I've talked to have some brand loyalty, such as "I absolutely love TI razors". What I'm looking for in this thread are the qualities that would make a person say that. I know a lot of it is feel, but since we're men here and technically don't have feelings, there has to be something about the blades specifically that a person likes or that define the brand.

You're on a wild-goose chase.

The problem is that the modern makers -- like the vintage makers -- produce a _whole line_ of razors! Once you have the production machinery and the craftsmen, you can make whatever razor the market wants. And the market wants a wide variety.

The Dovo "Best Quality" that I own has a fairly heavy grind. But the Dovo "Prima Klang" is a "singing blade" - a full-hollow, ground as thin as the craftsmen can do it.

TI (for one) uses several different kinds of steel in its line. So any generalization about "TI steel tend to be . . . " will have so many exceptions that it's useless.

I have three vintage Bokers. Two -- "commemorative blades" -- are fairly heavy grinds. One - a "King Cutter" -- is quite hollow and fairly delicate. They're all plenty sharp.

Right now, you can reasonably say that a modern Hart razor will have a heavier grind than most other razors. But when Hart comes out with a full-hollow model (which they could, any day), that generalization won't work any more.

There are a few statements that may hold water _in the average_:

. . . "Solingen steel tends to be harder than Sheffield steel"

comes to mind. But _somebody_, I'm sure, owns a particular Sheffield razor that -- by accident of tempering, or by design -- will put a typical Solingen blade to shame for slowness of honing. And "harder" doesn't mean "shaves better" !

. Charles

PS -- TheSuperiorShave.com has fairly detailed descriptions of different Dovo grinds. Take a look there, and see what I mean.