Results 1 to 10 of 194
Thread: E-cigarettes
Threaded View
-
01-06-2017, 04:29 PM #11
- Join Date
- Oct 2014
- Location
- Sunderland
- Posts
- 189
Thanked: 26
First thing i would say is definitely invest in a charger sooner than later, personally i dont like to charge stuff overnight but also it gives you the option of having a spare set of batteries pre-charged. The Nitecore D series chargers have not let me down yet and are pretty easy on the pocket.
Wismec are making some pretty solid battery mods right now and i have been tempted by the older model of the Reuleaux a few times but i would just be spending money for the sake of it as i am already sitting on more battery mods than i use.
The Reuleaux RX 2/3 can run with 2 or 3 18650 batteries which is pretty hardcore, the mod i use for work runs a single 18650 and i get 2 or 3 days from that (but i use it purely for work and switch to something with a bit more beef when i get home) Running it with 2 should give you a pretty good battery life, just make sure your batteries are from a reputable source and are legit, there are many fake batteries out there claiming to be sony's or vfests ect that have a lower amperage than the legit ones which puts a load on the batteries that you want to avoid, Legit,reputable vape stores ect are a much better source for batteries than place like amazon or ebay.
Just been reading up on that smok baby beast, good reviews, they are a company that is constantly improving and sell some good products.
Two things i noticed, both regarding the coils/replaceable atomizer heads for it.
Firstly, they by standard are a 0.2 ohm coil. I build my own coils for my tanks, and i build at about this resistance also but just a heads up, like you say... clouds!! your gonna be getting a helluva draw from this, also these lower resistances are what put high load on the battery which is why i mentioned earlier about legit/fake batteries.
Secondly, i only looked at 3 websites but i cannot find info on what wire type the coils are made from, this is not a problem or even really that important, infact i apologize if i am getting into areas that may sound technical or off putting, the reason i mention this is that it probably means they are made from a Kanthal wire, which is a pretty standard and good all round wire, however it means you cannot use your battery mod in temp control mode, only in wattage mode. Temp control only works with certain wire types (stainless steel, nichrome, titanium).
again, this is by no means a problem, i was put off using temp control for a long time just because running in wattage mode is straight forward and it does what it says on the tin.
in all, the wismec and baby beast will make a nice setup indeed and i hope it works out for you