Thread: Droescher stone

When you guys are done using your stones do you let the slurry dry on the stone so it can be reused?

i would say it is up to you. I usually wash off the slurry after I am done and make sure that the hone is ready for the next session.

I would draw a pencil grid on it and lap whichever side you're going to use. It will probably be a slightly lighter color on that side once lapped. I wouldn't glue the label back on if it is off. If you do waterproofing it is a good idea. I use some stuff called Krylon Preserve-It, a document protector. Seems to work alright.

I usually wash the stone off while giving it a rub with a nylon fingernail brush before I put it away. I don't always use slurry, if I do I still rinse the stone when I'm done. No hard and fast rules, just whatever your preference is.

Originally Posted by JimmyHAD

I would draw a pencil grid on it and lap whichever side you're going to use. It will probably be a slightly lighter color on that side once lapped. I wouldn't glue the label back on if it is off. If you do waterproofing it is a good idea. I use some stuff called Krylon Preserve-It, a document protector. Seems to work alright.

I usually wash the stone off while giving it a rub with a nylon fingernail brush before I put it away. I don't always use slurry, if I do I still rinse the stone when I'm done. No hard and fast rules, just whatever your preference is.

I soaked the label off, dried it and put the label and box in an envelope for posterity. The box is in poor shape and appears to have been in oil at one time.

It is a good finisher but I prefer using the Droescher and then follow with a 16k Shapton and then a HGH or Zulu. That blade is then finished. YMMV

Dave

I had both a droescher razor and stone. I still have the razor. The stone was EXCELLENT but I sold it because my guangxi gives better results but again those stones are very collectable and one of the best finishers you can get. IMO.

When I lap these things to avoid the slurry build up Shaun mentioned, I do it in the kitchen sink, under running water. Helps with stiction as well. The stone is probably a good finisher. To me Eschers or Thuringans provide a smooth edge that is not as 'crisp' as that of a good synthetic finisher. I imagine some would like that feel better, and others would prefer the crisp feel. I would finish on that stone and strop and shave. See what it feels like. Although the all pretty much look alike, they are not all the same.

Originally Posted by JimmyHAD

Although the all pretty much look alike, they are not all the same.

HAHAHA they are all just rock!

Originally Posted by Travispitt

When you guys are done using your stones do you let the slurry dry on the stone so it can be reused?

I rinse the slurry off and give it a quick rub on the DMT.