
Originally Posted by
JOB15
I see. So I would go 1k/4k/8k/ Nakayama with the three Asano then the tomo.
At the moment I go 1/4/8k then Shobu with a Nakayama Nagura then onto the Nakayama with a tomo nagura.
As with most things I think evolution and progression is where its at.[/QUOTE
I think you may find that if you max out your 8K synthetic edge and then go to a Botan slurry on your base stone it may take the edge backwards, this is where experimentation will help you.
I suggest that you hone a razor on your synthetic progression and shave off of your best 8K edge, then take that same edge and hone on a Botan slurry on your J-Nat till all the 8K scratches disappear and you have worked the slurry till it has broken down, strop and shave. This will tell you if you have made a refinement or gone backwards. Shave off of each slurry in your nagura progression as you refine the edge, this will help you to understand what each slurry adds in the edge refinement.
I typically set the bevel and advance through 3K on my Nani Pros, then switch over to the J-Nat progression. I use Botan, Tenjou, Mejero and Komo naguras, then finish with a Tomo slurry. I usually finish on light to medium slurry, sometimes plain water depending on the base stone and razor that I'm finishing with.
I don't think you will have any problem not having a Komo, you just need to hone on these slurries until they break down a good long ways, don't rush them. This is where shaving after each completed nagura slurry will help you get the idea where each slurry will take the edge.
If you chose to do this a time or two you may learn just what the combination of your base stone and the nagura or Tomo nagura is accomplishing in each step of your process.
Remember these are natural stones and are not alike, many differences, and this is where we have to learn our stones. My stones won't be the same as yours, this is true for nagura and Tomo also.
This is why we must test allot, to learn how to use what we have.
I hope this helps.
Frank