Results 1 to 10 of 78
Thread: Chinese 12k question (s)
Threaded View
-
04-04-2009, 08:18 AM #11
I've owned & used two of the Chinese 12 k's for about a year and found them identical in use. 2nd one was just smaller than the first house brick size one I bought.
Extremely slow. 100 + passes, closer to 200 but slurry helps a little. I used to use a DMTC for slurry but used to lap on a sheet of glass with fine grit Auto valve grinding paste (water based). Pretty quick to lap that way.
Stiction is a problem on wedges with large bevels, as Sham said blade sticks & skips.
Really great edges for such a cheap hone but hell I'm glad I just got an Escher. Final polish gets done now in a quarter the number of strokes. I've put over 20 razors thru eBay this year & my last hone job was 8 or so razors. I can tell you I was sweating on that Escher to arrive. The China 12's give good results but are not time & energy efficient.Last edited by onimaru55; 04-04-2009 at 08:31 AM.
“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”