Results 11 to 20 of 22
Thread: Chosera 1K Query
-
08-22-2013, 11:53 AM #11
I stopped soaking my chisera. The only ones i soak are nortons.
-
08-22-2013, 12:08 PM #12
Gentlemen, I splash my Chosera 1K and proceed. I don't I have ever soaked it.
-
08-22-2013, 03:19 PM #13
- Join Date
- Dec 2012
- Location
- Long Island NY
- Posts
- 1,378
Thanked: 177I guess the only way we could put this to rest is if someone has a relatively sensitive scale and weigh the stone after 30 minutes soak and after 24 hour dry time. This will tell how much water it could hold in that time and how much water it loses.
-
08-22-2013, 03:55 PM #14
- Join Date
- May 2005
- Location
- St. Louis, Missouri, United States
- Posts
- 8,454
- Blog Entries
- 2
Thanked: 4942I splash mine two tree times or so until the stone quits drinking and the water starts to pool a little and then start using it.
Have fun.
-
-
08-23-2013, 01:40 AM #15
-
08-23-2013, 03:26 PM #16
-
08-23-2013, 03:33 PM #17
I wasn't aware the higher grit Chosera's are prone to cracking. Good to know. I've been very happy with the Shapton GS stones. Splash and Go here for the Chosera 1k. I still prefer to use it as a bevel setter. FWIW, I lay a towel in a bathtub and allow my stones to dry in there overnight, or the dish drain if the Mrs. doesn't object.
We have assumed control !
-
08-23-2013, 04:13 PM #18
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,031
- Blog Entries
- 1
Thanked: 13245Honestly I abuse my hones, I do everything in this thread you guys are saying to be careful of and worse.. My Chosera 1k is soaking right now, has been for 20 minutes and might be for a bit longer before I get to honing... The 5k and 10k will follow it in the water as soon as I take the 1k out and start honing..
They are simply tools, and they will get used up, my Green Machine that started at +25mm is down to 12mm right now higher grits last longer because there is less pressure and less time spent on them but they will be used as tools..
Just haven't seen many of the problems you guys are showing here YET
-
The Following User Says Thank You to gssixgun For This Useful Post:
JBHoren (08-23-2013)
-
08-23-2013, 05:13 PM #19
I do think you are right about the dryng phase being perhaps the bigger culprit here, given the right(wrong) conditions.
As I live in Norway, we heat our house for about 7-8 months a year, and that tends to dry out the indoor air.
Both me and Mrs. sighed when I read her the A/C part
No need for that up here!!
As a result of this, I dry my stones wrapped in a towel.
This seems to have stopped, more or less, the continued cracking of my Choseras.
I have had them for 2,5 years now, and they are still performing perfectly, regardless of the hairline-cracks though.Bjoernar
Um, all of them, any of them that have been in front of me over all these years....
-
The Following User Says Thank You to Birnando For This Useful Post:
onimaru55 (08-23-2013)
-
08-23-2013, 07:55 PM #20
- Join Date
- Jun 2013
- Location
- wiltshire
- Posts
- 94
Thanked: 8It seems that most persons just splash and go rather than soaking !
I have been trawling around some sites and found this info about the Choseras courtesy of the Edenwebshop UK :---
During manufacture, Chosera sharpening stones are bound with magnesium. This superior production method guarantees superb results. However, these magnesium-bound stones are more prone to developing hairline cracks. To prevent this from occurring, it is important NOT to use too much water when wetting Chosera sharpening stones. So Chosera stones should NEVER be left to soak in water for a prolonged period of time! It is also important to dry these stones thoroughly after use and store them in a dry, dark place.
This seems to answer my original question, many thanks to everyone for their advice !