Results 1 to 10 of 21
Hybrid View
-
01-11-2014, 04:14 PM #1
- Join Date
- Jul 2012
- Posts
- 53
Thanked: 0i used a few methods first i held the razor at about 40 degrees on the lowest grit stone i could fing (125 aliminium oxide) and went forward and backwards quickly after this i put it flat on the hone with tape on the spine and went fowards and backwards quickly until it leveled out i then went up through the grits (250 ali minium oxide, 400 waterstone, 1000 cheap waterstone) i used the 1000 grit for ages to make sure to get all the scratches from the previous grits removed. then i honed on the 1k for 2 hours. at this point i moved onto the chorsera 1k.