You are not honing to the edge, photos 4 & 5, really show that.

If you hone on a DMT you will have to do extra laps to set a new edge and remove enough of the steel, that Diamonds chewed up, or simply joint the edge straight, then re-set the bevel to the straight edge.

Add a layer of tape and ink the bevel, make sure you are honing all the way to the edge and removing all the ink. When the bevels are set all then ink should come off in a few strokes. Don’t be afraid if you “think” the bevel is set to joint it, then re-set it, it should only take 15-20 laps. Then you will be sure the bevel is set, fully.