Results 1 to 3 of 3
Like Tree5Likes
  • 3 Post By yondermountain91
  • 1 Post By Aerdvaark
  • 1 Post By JOB15

Thread: Bit by the Jnat Bug

  1. #1
    Senior Member yondermountain91's Avatar
    Join Date
    Nov 2016
    Location
    Somewhere in Mass.
    Posts
    320
    Thanked: 80

    Default Bit by the Jnat Bug

    Well a few weeks ago I couldn't help myself and purchased a Jnat from a fellow member (far stone on left)

    Well after a lot of practice I have come up with an edge that is really actually not bad. My ATG pass sucks no matter who honed it so I usually judge by my mustache area and I have been quite pleased with how this razor feels. Definitly glad I started with the natural. My first few attempts were not exactly what I was looking for, but after countless you tube videos and a lot of practice I can actually do this!!

    My process was to raise a medium slurry with the light green Thuringian slurry stone. Start with circles medium pressure both ways about 30 each. Then another 30 with light pressure. Slurry is really nice and dark already. Do about 25 X strokes. really crossing over because there is a slight wobble in my Dovo. Then spray the blade and dilute slurry, did 30 more circles this time no pressure. Then more X strokes, again really crossing over to the toe using my other hand to make sure everything stayed flat. After another dilution a stropped about 60 laps on SRD premium cotton, noticed that the blade wasn't under cutting the water/slurry mix. Continued with about 40 more light pressure X strokes until it was stickin and under cutting again. Then moved to just plain water and did about 50 stupid light pressure X strokes. Stropped about 50 on cotton then about 100 on leather, and this is one happy shaver over here!! Obviously have a really loooooonnnggggg way to go, but figured I would share my progress.

    Special thanks to Pete for giving me his personal number to reach out to.
    Marshal, sqzbxr and Aerdvaark like this.
    "If the brakes don't stop it, something will"

  2. The Following 2 Users Say Thank You to yondermountain91 For This Useful Post:

    Aerdvaark (03-16-2017), MedicineMan (03-16-2017)

  3. #2
    < Banned User >
    Join Date
    Oct 2016
    Location
    Saratoga, CA
    Posts
    597
    Thanked: 59

    Default

    I miss that little stone already... I sold the one on the right here too and turned the one in the middle into nagura. You will get there, I wonder if you are over stropping? Cut your stropping passes in half and see if that does anything.
    Marshal likes this.

  4. #3
    www.edge-dynamics.com JOB15's Avatar
    Join Date
    Feb 2013
    Location
    London
    Posts
    3,066
    Thanked: 512

    Default

    Have you tried using the stones as naguras?

    As always setting the bevel is the key part.
    Good luck
    Oh you only have the one....Try a fine DMT card..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •