Thread: Low grit ??

Originally Posted by Whiskers

Off of the 1000 grit paper, it was literally popping arm hairs. I was really psyched about this blade.

Then, I went to the 4k ... then 8k ... then 12k.

Originally Posted by hi_bud_gl

This is not enough on 12 you will need to do at least 100-150 get something out of your chineese 12

Progression is right

Originally Posted by Whiskers

I thought I might be overhoning, so I tried the pyramid method. It worked, but the edge was sharp for about 1/2 of a shave. To me, an edge should last at least one shave before refreshing it on a higher grit stone.

this is a sign or the overhoning.
Now what to do
you will need to put a new bevel to your blade and start all over.
the easiest and best way to start doing all this is buy a micriscope doesn't matter at least 30x which you can see the edge.
start 1000 set bevel then go to 4k this stage is very important i mean it after this stage you should be able to cut hair on your arm.
then 8k does more polishing and final stage 12 kyou need to do at least 100-150 strokes on it. strop and good luck
Now all your stones should be flat =lapped.good luck don't be stranger have questions just ask