Results 1 to 10 of 23
Thread: What happened?
Hybrid View
-
06-06-2011, 09:13 AM #1
what stone progression are you using your not getting the lower grit scratchs out
-
06-06-2011, 06:04 PM #2
- Join Date
- Dec 2010
- Location
- Slovakia
- Posts
- 51
Thanked: 2I use these:http://www.fallkniven.com/en/shop/de.../sharpeners/d4
Small Naniwa Combination Stone Grit 1000/3000 - 1000 grit is not good, 3000 yes, sometimes Rozsutec-about 8 000, Moravian Suchacek slate about 8000, Chinese 12 K.
Almost all are natural and slow maybe thatīs problem. I think i need something like this: Combination Stones | DICTUM GmbH - More Than ToolsLast edited by Rotavator; 06-06-2011 at 06:11 PM.
-
06-06-2011, 07:50 PM #3
It may be that your Rozsutec/Suchacek, being natural stones, are more like 10k than an 8k. And being slow, it may be too much of a jump to go from the 3k to the others without spending a TON of time working out the 3k scratches. Maybe someone with more experience with your particular stones can speak to this with more authority.
-
06-06-2011, 07:52 PM #4
You should get better results with a medium slurry on the rozsutec to bridge the gap between the 3k.
-
06-07-2011, 07:34 PM #5
- Join Date
- Dec 2010
- Location
- Slovakia
- Posts
- 51
Thanked: 2I have a new Naniwa 600 grit stone and i ordered Norton 220/1000 for better bevel setting.
I know they write that Rozsutec is about 6000 grit, but it is really finer. That is stone from my land and i experimented with it for a year.
-
06-08-2011, 06:50 AM #6
- Join Date
- Dec 2010
- Location
- Slovakia
- Posts
- 51
Thanked: 2I have tried that razor a little and i think it shaves nicely.
-
06-06-2011, 07:52 PM #7
Rozsutec stone is around 6k if your new to honing i would stay away from diamond stones they leave deep scratchs