Thread: New at this, need a little help

Hello All,

I'm new to the razor collecting and was hoping someone could help me identify a razor . It has an anchor as the only marking on the tang and has what appears to be tortuous shell or horn with some ornate carvings. Please see attached and I appreciate you time and consideration.

Thanks, Mitch

Welcome to SRP

You have a nice old razor there. The mark looks like a W. Goodlad. Take a look at this post by Neil Miller where he posts some relevant marks, for a similar razor ID question.

The scales look more like pressed and dyed horn than tortoise shell. ScienceGuy posted a good Primer on genuine Tortoise Shell. His primer will help more than I could.

Jonathan

Thank you for your reply, every bit of info is much appreciated.. I've seen different versions of this stamp but the rope or strode is always different. It's been fun trying to figure out what it is, it's not like a little Valley that has a lot to compare to. Thank you again.

Mitch

I love that razor.................
Hi & welcome to SRP. You will love it here & there is plenty to learn as there is a wealth of information on here! Here is the first bit of information for you to know:
Straight Razor Place - Beginners Tips: December 2014
Frequently Asked Questions - Straight Razor Place Library
You will want to buy you a nice straight razor to begin with whether used or new. Beware of used ones not that they are bad but know what to look for like a lot of hone wear on the spine & edge or chips in the blade. Stay away from razors with rust on the cutting edge as that will only result in it chipping more metal off as it is honed. Here is also a list of straights to stay away from:
http://straightrazorpalace.com/srpwik...azors_to_Avoid
Here is a list of good brands of razors you will want to own plus there are more than just these out there which you will find out from other members here:
http://straightrazorpalace.com/srpwik...t_Razor_Brands
If buying a new razor, I suggest you buy one from Straight Razor Designs - Gifts for Men | Straight Razors or SRD. The owner & founder of this forum is Lynn & he is also part owner of SRD. When you buy a straight razor from him, he will personally hone that razor before you get it plus you will get a certificate for another free honing for when that razor needs it which should be a few months. There will be vendors who will sell you a straight razor that is supposed to be shave ready but really won't be. You will most importantly need to know how to strop & you can learn in the Library or here:
http://straightrazorpalace.com/srpwik...azor_stropping
You will need to strop your razor before & after you shave. If you buy one from Lynn, chances are you won’t have to strop it before you use it the first time.
You will also need a shaving brush, a shaving mug & some shaving soap. Later it will also do you good to get a second straight razor so that when you send the first one out to be honed, you will have a backup to shave with.
Here is a link to the Library where you will find stropping in there & everything else you will need to know including how to hone:
http://straightrazorpalace.com/srpwik..._Place_Library
Also here is Lynns bevel setting video & some of gssixguns honing video's:
https://www.youtube.com/user/gssixgun/videos
Bevel setting on a Chosera 1K taught by Lynn Abrams
Here is another good link to know:
Welcome to the Workshop: How do I / Where do I / What do I / answers are here
Should you have any questions, there are a lot of knowledgable members on here that will be more than happy to help you out. If you want to find someone in your area, you can look here:
http://straightrazorpalace.com/srpwik...php/Local_Help
And if you can't find anyone near you, just ask and someone that lives in your are & hopefully they will let you know how to meet up & you can get some one on one mentoring. There is a lot to do on here, just search everywhere on the forum & in the Library. You will spend hours on here & have fun doing it, so there you go, have at it!
Good luck & have fun!

Wow!

Now that is a beauty, usually anything antique with the Anchor stamp on it is rare, and with those scales, that looks spectacular. Funny you should post this, I just won a razor with that exact Anchor stamp, but the blade is stamped as I.Barber as the maker.

I have four different razors with the Anchor mark, and they all shave wonderfully, that's a great find! Congratutions!

Thank you, do you know who made it and when? Are your 4 the same stamp?

Originally Posted by Mitchp

Thank you, do you know who made it and when? Are your 4 the same stamp?

Check out the post linked in the thread from Datsots...lots of info there...yours is most likely the Goodlad...but check out the other thread....

Sorry, my first message is wrong & it was brought to my attention. I think they made some changes but this is the right message here:
Hi & welcome to SRP. You will love it here & there is plenty to learn as there is a wealth of information on here! Here is the first bit of information for you to know:
Straight Razor Place - Beginners Tips: December 2014
Frequently Asked Questions - Straight Razor Place Library
You will want to buy you a nice straight razor to begin with whether used or new. Beware of used ones not that they are bad but know what to look for like a lot of hone wear on the spine & edge or chips in the blade. Stay away from razors with rust on the cutting edge as that will only result in it chipping more metal off as it is honed. Here is also a list of straights to stay away from:
Brands of Straight Razors to Avoid - Straight Razor Place Library
Here is a list of good brands of razors you will want to own plus there are more than just these out there which you will find out from other members here:
Good Straight Razor Brands - Straight Razor Place Library
If buying a new razor, I suggest you buy one from Straight Razor Designs - Gifts for Men | Straight Razors or SRD. The owner & founder of this forum is Lynn & he is also part owner of SRD. When you buy a straight razor from him, he will personally hone that razor before you get it plus you will get a certificate for another free honing for when that razor needs it which should be a few months. There will be vendors who will sell you a straight razor that is supposed to be shave ready but really won't be. You will most importantly need to know how to strop & you can learn in the Library or here:
Razor stropping - Straight Razor Place Library
You will need to strop your razor before & after you shave. If you buy one from Lynn, chances are you won’t have to strop it before you use it the first time.
You will also need a shaving brush, a shaving mug & some shaving soap. Later it will also do you good to get a second straight razor so that when you send the first one out to be honed, you will have a backup to shave with.
Here is a link to the Library where you will find stropping in there & everything else you will need to know including how to hone:
Beginner's Guide to Honing - Straight Razor Place Library
Also here is Lynns bevel setting video & some of gssixguns honing video's:
https://www.youtube.com/user/gssixgun/videos
Bevel setting on a Chosera 1K taught by Lynn Abrams
Here is another good link to know:
Welcome to the Workshop: How do I / Where do I / What do I / answers are here
Should you have any questions, there are a lot of knowledgable members on here that will be more than happy to help you out. If you want to find someone in your area, you can look here:
Local Help - Straight Razor Place Library
And if you can't find anyone near you, just ask and someone that lives in your are & hopefully they will let you know how to meet up & you can get some one on one mentoring. There is a lot to do on here, just search everywhere on the forum & in the Library. You will spend hours on here & have fun doing it, so there you go, have at it!
Good luck & have fun!
Steve

Welcome to SRP. Good looking piece of history you have there. Hope it performs as good as it looks.