Results 1 to 10 of 20
Thread: Hello from Virginia
-
12-12-2015, 01:38 PM #1
- Join Date
- Dec 2015
- Location
- Blackstone, Virginia
- Posts
- 28
Thanked: 0Hello from Virginia
I have been reading and studying straight razors for several months. I have been shaving with DEs for over 2 years. Last night, I finally dove in and purchased my first straight - a hopefully barely used Ralf Aust 5/8.
Thank you for all of the helpful information on this site. I hope to be able to give something back when I gain some experience.
Denis
-
12-12-2015, 10:18 PM #2
Welcome to the wealth of knowledge that is SRP, don't be afraid to ask questions. As long as that razor came in shave ready it'll be a great starter, I have the same one. You will need a strop, however, if you don't already have one. Best of luck and enjoy it.
-
The Following User Says Thank You to zugbug For This Useful Post:
TomSlick (12-13-2015)
-
12-13-2015, 01:32 AM #3
Welcome aboard!
There is a learning curve, and you will, at first, not be able to get as good of a shave from your straight as you did you DE. Dont let that discourage you... keep at it, and you'll be good as good in no time!Recovered Razor Addict
(Just kidding, I have one incoming...)
-
The Following User Says Thank You to Aldwyn For This Useful Post:
TomSlick (12-13-2015)
-
12-13-2015, 01:51 AM #4
Hello, Denis. Welcome to Straight Razor Place!
-
The Following User Says Thank You to Leatherstockiings For This Useful Post:
TomSlick (12-13-2015)
-
12-13-2015, 04:51 AM #5
Welcome to SRP!
I hope your research included the beginner's section on the site here. If it didn't, then read through it.
If you have any questions, then ask away.Some people never go crazy. What truly horrible lives they must lead - Charles Bukowski
-
The Following User Says Thank You to criswilson10 For This Useful Post:
TomSlick (12-13-2015)
-
12-13-2015, 02:59 PM #6
- Join Date
- Dec 2015
- Location
- Netherlands
- Posts
- 27
Thanked: 4Welcome tomslick ^^/
Good luck and Fair shaving to you ^-^/
-
The Following User Says Thank You to technonine For This Useful Post:
TomSlick (12-13-2015)
-
12-13-2015, 03:20 PM #7
Welcome! That's a good choice for your first straight, I have the same razor in my rotation. Feel free to ask questions and have fun!
-
The Following User Says Thank You to Ernie1980 For This Useful Post:
TomSlick (12-13-2015)
-
12-13-2015, 03:25 PM #8
- Join Date
- Dec 2014
- Location
- Virginia, USA
- Posts
- 2,224
Thanked: 481Welcome! A fellow Virginian, small world! Good to have ya around.
-
The Following User Says Thank You to Marshal For This Useful Post:
TomSlick (12-13-2015)
-
12-14-2015, 12:48 AM #9
Hi Denis & welcome aboard. I see you gat a Ralf Aust, very good razor. There is one on eBay & i just looked & it is still there so I know you didn't get it from there but it is just a tad less than what it goes for on Straight Razor Designs plus the one from SRD comes shave ready & you get a free honing with it when it needs it. I hope it still has the edge on it & it is possible that Lynn honed it if it originally came from SRD. I hope you have a strop with it because if not, you will need one asap. You can also practice stropping with a butter knife or dull knife to keep from cutting your strop & dulling the edge on the razor. Like Cis said, go to the Beginners Guide & move on from there. You'll be there reading until you get tired & it is time for bed!!!
Great to have you here. Any questions, just ask!
Good luck my friend.
-
The Following User Says Thank You to engine46 For This Useful Post:
TomSlick (12-14-2015)
-
12-14-2015, 01:02 AM #10
Welcome to SRP, Denis!
Mike
-
The Following User Says Thank You to SRNewb For This Useful Post:
TomSlick (12-14-2015)