Results 1 to 10 of 13
Thread: opinion on a wedge
Hybrid View
-
07-01-2007, 05:45 PM #1
Norm,
got any pictures? like Brunos says, DD satin wedges are very nice, and above run of the mill. I would suggst that you either hold off working on it until you gain restoration experience or your get somebody to restore it for you, like JoeChandler, Garythepenman or bill ellis (www.billysblades.com). like other owners i love my DD, even though none of them our currently in my rotation.
they tend to be absolutely great shavers.Be just and fear not.
-
07-01-2007, 05:51 PM #2
Norm,
i just noticed you are in montreal, you might want to PM vladsch who has been known to do pure art in his restorations and is also located in the Montreal area.Be just and fear not.
-
07-02-2007, 01:16 AM #3
- Join Date
- Nov 2006
- Location
- Montréal
- Posts
- 58
Thanked: 0
-
07-02-2007, 01:43 AM #4
The DD Satin Wedge was one of the last wedge razors manufactured by any company. It was made in response to requests by barbers for a wedge razor. In some ways they are a wedge technically speaking but are much lighter and easier to hone then typical wedges. They are quality razors. The one you have appears to have a wierd frown to it unless thats just the picture. It may take some work to straighten out. I would send it out.
No matter how many men you kill you can't kill your successor-Emperor Nero
-
07-02-2007, 02:05 AM #5
- Join Date
- Nov 2006
- Location
- Montréal
- Posts
- 58
Thanked: 0
-
07-02-2007, 06:30 AM #6
From my own somewhat limited experience with wedges I don't think they're that much more difficult to hone than hollows. They just might take a bit more time depending on the condition of the edge/bevel. Most of the more recent wedges have at least some small amount of inward curvature from the edge to the spine. Older wedges (Late nineteenth, early twentieth century.) tend to be a bit more slab sided with a "smiling" (curved) edge making it a bit trickier to ensure the entire length of the blade maintains contact with the honing surface. Taping the spine, besides protecting it, slightly increases the angle of the edge on the hone which should improve the results.
-
07-03-2007, 02:39 AM #7
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 8,023
- Blog Entries
- 1
Thanked: 2209I would agree that the edge has a slight "frown" shape. Correcting this is not for a beginner. I would suggest that you contact Joe Chandler or one of the other guys here to hone this razor for you.
BTW, it is a very good quality razor so do not practice on it. As far as wedges being difficult to hone that is usually referring to late 19th or early 20th century english made razors. Wade & Butcher, Wostenholm, Tally Ho etc. They are big and thick. But these are not difficult, except when they have a "frown" shape to the edge.
Just my two cents,Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin
-
07-02-2007, 01:11 AM #8
- Join Date
- Nov 2006
- Location
- Montréal
- Posts
- 58
Thanked: 0Gentlemen,
It is not my intension to ruin a good blade, here is a picture of the razor in question, I am not sure if it is the reflection of the light but I believe it looks better in reality, I do not have a lot of experience but I don’t think there is something major on the edge and I am almost sure it can be polish like a mirror. So what do you think? Training razor or not. And by the way how do they shave.
Have a great day
Norm.