Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Help with Razor

  1. #1
    Member Buckfever4life's Avatar
    Join Date
    Apr 2010
    Location
    West Virginia
    Posts
    60
    Thanked: 5

    Default Help with Razor

    Well I found one of my grandfathers razor the other day and am wanting to know some information on it. The plating is nearly all worn off and I want to have it polished and restored. It is a thick wedge with barbers notch and "Wostenmolm & Sons" "+ EBRO +" "France Works" on the blade. There appears to be an iron cross before and after the word EBRO. I have no idea what the scales are made out of, but they are fairly thin. They appear to be some type of bone or horn material. Any/all help would be greatly appreciated.







    Last edited by Buckfever4life; 05-30-2010 at 02:57 PM.

  2. #2
    Member Buckfever4life's Avatar
    Join Date
    Apr 2010
    Location
    West Virginia
    Posts
    60
    Thanked: 5

    Default

    Please note that there no "J" initial before the name. I did some research on the web and found several blades, but they had the first initial before "Wostenmolm"


  3. #3
    Senior Member blabbermouth Joed's Avatar
    Join Date
    Jun 2008
    Location
    Upstate NY
    Posts
    5,003
    Thanked: 1827

    Default

    Nice razor and being a wedge it should restore nicely. Looks like the scales are bone. Wostenholm is a good brand nut I am not familiar with that particular stamping. Other will chime in with more info.
    “If you always do what you always did, you will always get what you always got.” (A. Einstein)

  4. #4
    BF4 gamer commiecat's Avatar
    Join Date
    Jan 2009
    Location
    Gainesville, FL
    Posts
    2,542
    Thanked: 704

    Default

    There's a similar blade in the DB:
    Wostenholm, Joesph "EBRO" 11/16 - Straight Razor Place Wiki

    Perhaps Manah or someone else can chime in with more info about the manufacturer and dates of operation.

  5. #5
    Member Buckfever4life's Avatar
    Join Date
    Apr 2010
    Location
    West Virginia
    Posts
    60
    Thanked: 5

    Default

    Thank you both for your help/information. What kind of bone do you think it is?

  6. #6
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    Yup, do indeed note it is a J Wostenholm, not a G Wostenholm - two different companies. I have had a few J's and many mayn G's - I like both.

    I agree with the above that the scales are bone, the color and the pores give it away. I'd never even thought about what types of bone might be used...

  7. The Following User Says Thank You to holli4pirating For This Useful Post:

    Buckfever4life (05-31-2010)

  8. #7
    I Bleed Slurry Disburden's Avatar
    Join Date
    Feb 2009
    Location
    Carmel, NY
    Posts
    2,458
    Thanked: 545

    Default

    It'll end up being a great shaver, thanks for sharing! Post pics when its cleaned up!

  9. The Following User Says Thank You to Disburden For This Useful Post:

    Buckfever4life (05-31-2010)

  10. #8
    Senior Member Croaker's Avatar
    Join Date
    Feb 2008
    Location
    Arizona
    Posts
    1,360
    Thanked: 376

    Default

    I think we need Manah's help on Joseph Wostenholm & Sons razors. The EBRO trademark was used by both J. Wostenholm & Sons and Adolf Castor, just to make the issue even more confusing. I have two Joseph Wostenholm & Sons razors, which are both marked with EBRO between 2 Maltese crosses, and "Perseverance Works". Your razor is marked with "Paris Works", and looks like it could be much older than mine. By the way, yours is a very nice looking razor and I am sure it can be honed up to make a great shaver.
    My information came from two sources: sites listed below.

    JOSEPH WOSTENHOLM & SONS,
    Perseverance Works
    Sheffield
    (1892)
    Cutlery in general
    Ref. 1892

    English electroplate and silver plate: marks and hallmarks of Sheffield makers EA-EZ

    http://www.sha.org/research_resource...0Tableware.pdf

  11. The Following User Says Thank You to Croaker For This Useful Post:

    Buckfever4life (05-31-2010)

  12. #9
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    8,023
    Thanked: 2209
    Blog Entries
    1

    Default

    I have a J Wostenholm Ebro Sheffield and it dates from 1854.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  13. #10
    Member Buckfever4life's Avatar
    Join Date
    Apr 2010
    Location
    West Virginia
    Posts
    60
    Thanked: 5

    Default

    Thanks everyone for the info

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •