Results 1 to 10 of 14
Thread: Dovo problem??
-
10-28-2012, 07:56 PM #1
Dovo problem??
Ok bought a dovo on eBay had Mike from mason razor works do a restore on it and he also honed it. Shaved it once it was awesome Mike did great work. Here is my problem tried shaving with it Again After stropping it btw I'm. Newbie to this whole sr thing. It pulled like hell .. Any ideas I'm thinking it's my bAd stropping mAybe .. I've stropped my double duck and it shaved fine..
-
10-28-2012, 09:01 PM #2
Well, by the process of deductive reasoning here you know it shaved great on day one and it shaved terrible on day two so since the only factor in between shaves was the stropping you can probably conclude it was your stropping.
Of course another possibility is the hone job was such that the edge deteriorated during the original shave. Maybe the edge was too delicate. If that was the case an examination with some mag would show that.No matter how many men you kill you can't kill your successor-Emperor Nero
-
10-28-2012, 11:21 PM #3
- Join Date
- May 2010
- Posts
- 4,562
Thanked: 1263thebigspendur pretty much summed it up for you. Depending on how proficient you are with your stropping you may have rolled the edge. You could try stropping it again to see if you can possibly bring the edge back, or look under magnification to see what other problem may be there.
-
10-28-2012, 11:28 PM #4
Or you could try using some punctuation in your post, that way i dont have to read it 27 times to understand fully.
-
10-28-2012, 11:29 PM #5
Rules of Stropping:
1. Stropping is good for a razor's edge.
2. Bad stropping is bad for a razor's edge.
3. If the stropper is new at stropping, there is a very small likelihood the stropping will help.
4. An edge that is good prior to bad stropping will get worse.
-
10-28-2012, 11:45 PM #6
- Join Date
- Mar 2010
- Location
- Boise, Idaho
- Posts
- 334
Thanked: 57[SIZE=4]Don't feel bad. Everyone dulls their first razor while learning to strop, myself included. That's part of the learning curve. Try stropping it again, but go slow across the leather and concentrate, no pressure, and if that doesn't work, yep, you'll have to re-hone it to get the edge back. But at least now you've crossed that bridge./SIZE]
-
10-29-2012, 12:25 AM #7
- Join Date
- Aug 2012
- Location
- Greenwood, Nova Scotia
- Posts
- 1,144
Thanked: 116Everyone here is giving great advice! When you're stropping make sure that you are pulling your strop tight. You don't have to white knuckle it but make sure that you're not allowing the strop to bow while you are performing the strokes. As mentioned, take it easy, once step at a time, move that razor nice and slow. If your strop is thinner than the razor, make sure you are doing an 'x' stroke to ensure that all the steel is being stropped evenly.
Best of luck to you.
-
10-29-2012, 02:09 AM #8
You might try laying the strop on a table/counter top to keep it flat until you learn proper stropping. In the mean time practice with a butter knife with the strop hanging until you get proper technique. Once you are confident with your butter knife/hanging strop technique then try doing it with a razor. These tips will save your strop and the razor's edge.
-
10-29-2012, 05:07 AM #9
-
10-29-2012, 12:11 PM #10