Thread: Ok...let's go over this one more time...

Originally Posted by Castel33

What shavettes did you order? Knowing that guys can give you better knowledge on their individual quarks.

For the most part you plan sounds like a good one. I agree that the cork is not needed but I know some guys like that.

When you go to shave for the first time start with the blade almost flat to the face and slowly move it to a steeper angle till it stars to cut the hair and glide across the skin.

Good advice on the angle of the blade...I will keep that in mind. The two I ordered are the Parker SR1 and Bluebeards Revenge. Any tips on these are welcomed.

sounds like your fine for your mission...leave out the cork. Let us know how it all comes out for you. I have a feeling you will be fine. There are fine vintage SR on the classifieds I was just looking. Just busting on you.

Best of luck and hope the shavetts get there soon to you.

Sounds like you may be overthinking the whole process a bit. If you're currently a DE shaver you have all the basics down. As far as the non-razor part of the routine, I'd just do whatever you normally do for a DE shave. Yeah, you'll need to learn to hold a drive a shavette (and probably a traditional straight after that) but don't let it freak you out too badly. Just pay attention to blade angle, placement and pressure (just like a DE) and here's one I learned the hard way: If for whatever reason, the blade binds or doesn't move the answer is NOT put some arse behind it (force it). Instead, pick the blade up re-set and gently glide the blade where you want it.

It really is a bit like the first few times you drive on snow and ice. If you're driving along with a white knuckle grip on the steering wheel and four inches of drivers seat upholstery slammed between your butt cheeks, as soon as the rear end wanders just a little, you'll freak out, whip the wheel in six directions and the car will end up hitting something or running off in the ditch. It's just driving (or in this case, shaving) relax and enjoy the ride.

Originally Posted by 1OldGI

It really is a bit like the first few times you drive on snow and ice. If you're driving along with a white knuckle grip on the steering wheel and four inches of drivers seat upholstery slammed between your butt cheeks, as soon as the rear end wanders just a little, you'll freak out, whip the wheel in six directions and the car will end up hitting something or running off in the ditch. It's just driving (or in this case, shaving) relax and enjoy the ride.

Beautifully put!
your analogy just made my morning!

Originally Posted by 1OldGI

Sounds like you may be overthinking the whole process a bit. If you're currently a DE shaver you have all the basics down. As far as the non-razor part of the routine, I'd just do whatever you normally do for a DE shave. Yeah, you'll need to learn to hold a drive a shavette (and probably a traditional straight after that) but don't let it freak you out too badly. Just pay attention to blade angle, placement and pressure (just like a DE) and here's one I learned the hard way: If for whatever reason, the blade binds or doesn't move the answer is NOT put some arse behind it (force it). Instead, pick the blade up re-set and gently glide the blade where you want it.

It really is a bit like the first few times you drive on snow and ice. If you're driving along with a white knuckle grip on the steering wheel and four inches of drivers seat upholstery slammed between your butt cheeks, as soon as the rear end wanders just a little, you'll freak out, whip the wheel in six directions and the car will end up hitting something or running off in the ditch. It's just driving (or in this case, shaving) relax and enjoy the ride.

Great winter driving analogy. Yes, I am probably overthinking the whole process...but that's just my OCD kicking in...I am enjoying learning a new shaving process, more toys to buy etc..

Originally Posted by Whizbang

Great winter driving analogy. Yes, I am probably overthinking the whole process...but that's just my OCD kicking in...I am enjoying learning a new shaving process, more toys to buy etc..

Sorry to sound like a frump but less toys are better until you develop proficiency with the 2 you have, in the case of a shavette one would be better. I say this as it reduces the variables, you can already change blades and don't have to strop etc.

Originally Posted by edhewitt

Sorry to sound like a frump but less toys are better until you develop proficiency with the 2 you have, in the case of a shavette one would be better. I say this as it reduces the variables, you can already change blades and don't have to strop etc.

I hear you loud and clear. Actually I don't plan to buy any toys until I know the direction I want to take with SR shaving. I ordered two shavettes because I was concerned about the grip in my hand...this is important to me. I will pick the one that feels best in my hand and work with that one until I learn how how to shave with it properly. I won't switch back and forth...as you say, it will reduce the number of variables. Thanks for the advice.

Originally Posted by Whizbang

I hear you loud and clear. Actually I don't plan to buy any toys until I know the direction I want to take with SR shaving. I ordered two shavettes because I was concerned about the grip in my hand...this is important to me. I will pick the one that feels best in my hand and work with that one until I learn how how to shave with it properly. I won't switch back and forth...as you say, it will reduce the number of variables. Thanks for the advice.

Seems sensible keep us updated