Results 1 to 10 of 57
Like Tree67Likes

Thread: Can You Get A Straight Razor Too Sharp?

Hybrid View

  1. #1
    Senior Member RMarsh's Avatar
    Join Date
    Feb 2013
    Location
    New Mexico
    Posts
    490
    Thanked: 73

    Default

    did you strop it after the film?

  2. #2
    Member
    Join Date
    Feb 2014
    Location
    Columbus, Ohio
    Posts
    56
    Thanked: 6

    Default

    After 1u film I lapped it 30 or so times with 5 micron chromium oxide and then 60 laps on leather strop, maybe I shouldn't have used c/o as this would make it duller? I checked the razor after I used c/o and it felt sharper. There are so many ways to sharpen a razor that sometimes it is really hard to know what to do, I guess what ever works is the best.

  3. #3
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,984
    Thanked: 13234
    Blog Entries
    1

    Default

    There is so much you left out..

    What kind of razor Make, Grind, edge profile
    Hone wear

    You also complicated the entire process by using two finishers

    Drop the film use the PHIG and see if that doesn't fix the issue

    Length of the CrOx strop ??? type of CrOx???

    Most people use about 7-10 laps on the average 16 inch strop, after using either the PHIG or the Film using both might have taken the edge too far..

    There is Correct honing and Incorrect honing everything basically falls into those two descriptions..


    PHIG = Peoples Home of Indeterminate Grit they probably are not really 12k

    Depending on your answers perhaps we can guide you a bit more

    From what you have so far my recommendation would be to strop carefully 100 times on leather and try another shave and then see what the edge looks like under magnification...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •