Results 1 to 10 of 14
Hybrid View
-
10-15-2010, 08:03 PM #1
Thoughts on shave results with new razor
Ok, my new 13/16 Wacker Stosser wedge came yesterday from shaving shop. This was the first shave today. Everything has been the same except the razor.
I have been using a Dovo 25 or 5/8 Bengall or 5/8 Landers Frary & Clark, all carbon steel.
I noticed a lot of irritation post shave than I have from any of the my other shaves.
1. Why so much irritation and how to avoid it?
-
10-15-2010, 08:29 PM #2
-
The Following User Says Thank You to commiecat For This Useful Post:
speckey (10-15-2010)
-
10-15-2010, 08:36 PM #3
I was curious if using the Wedge with the same angles that I have been using is the reason. If I need to lessen the angle?
-
10-15-2010, 08:37 PM #4
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,068
- Blog Entries
- 1
Thanked: 13249Last edited by gssixgun; 10-15-2010 at 08:39 PM.
-
The Following User Says Thank You to gssixgun For This Useful Post:
speckey (10-15-2010)
-
10-15-2010, 11:07 PM #5
yea assuming the razor is up to snuff I would also guess the increased weight is the culprit.
No matter how many men you kill you can't kill your successor-Emperor Nero
-
The Following User Says Thank You to thebigspendur For This Useful Post:
speckey (10-15-2010)
-
10-15-2010, 11:24 PM #6
Do i need to adjust my angle? It was a smooth shave except for all the redness that went away in 90 mins or so, but it was red. Now its fins smooth no nicks, cuts, or bumps.
-
10-15-2010, 11:28 PM #7
Next time you shave with it analyze your technique. Are you using any more pressure to accomplish the results ? When I was starting out I found that excessive pressure led to irritation.
Be careful how you treat people on your way up, you may meet them again on your way back down.
-
The Following User Says Thank You to JimmyHAD For This Useful Post:
speckey (10-16-2010)
-
10-18-2010, 12:38 AM #8
15 wk noob's take
I LOVE my stosser wedge (and 6/8-1/4hol, and 15/16 hol). I also use an old warhorse - well worn B.J. Eyre wedge. With the wedges & the 1/4 hollow, it was easier for me to substitute pressure for a good stretch & proper angle. At that time, I wasn't able to use small (5/8) hollow because I didn't understand the wiki instructions on angle were a general rule of thumb for wtg. Since changing angle as needed, and changing to a very light contact pressure, I still get great shaves from the heavy grinds, but also get to enjoy the hollows. The heavy grinds simply allowed me to use pressure more easily than the flexible hollows.
You may be way beyond my experience there, but the others responding seem to be saying something similar about pressure/angle. I'll be flat amazed if you don't find that to be just a wonderful blade. If you don't like it, and I'm able to do anything about it - lets talk
On a side note, check to see if your normal angle/pressure gives any pull to the blade. The 1/4 hol. I got from John, and the stosser - both came w/ very good edges that didn't last long. After a couple weeks, the heels on both blades stopped lopping hanging hair & wouldn't revive with stropping. The monster hollow (15/16) was not really shave ready. With each blade, I was unable to reproduce John's stroke to use a finisher for touch-up. I had to reset bevels. Specifically on the stosser, I wish I'd have used 2-3 layers of tape. As delivered, John's edge completely mocked the received wisdom that wedges don't give feedback. Mine gave audible and tactile feedback really well. When I reset the bevel, I used no tape, and it made the bevel noticeably wider - and now the feedback is greatly reduced. It's conjecture on my part that the increased bevel width subdued the feedback, but the two changes appear to have happened at the same time.
Best of luck, Speckey. I think you made a very good choice w/ that wedge.
-
The Following User Says Thank You to pinklather For This Useful Post:
speckey (10-20-2010)