Thread: How to efficiently cut slabs for scales?

Originally Posted by miha

Huh I have the same problem with cutting straight slabs(with the additional problem of not having a place I could call a workshop). Sometimes I tr to compensate with a hand "angle guided" saw, but when possible get them sawn by some who has a eg band saw. Do any of you have an idea of somesort hobby saw that might do the job? I know that this is miles away from what sou are talking about here, but in my case this kind of saw is not an option (kitchen table during the night).

You may be able to cut scales with that but you are not going to have much success cutting slabs. You have a pile of nice scrap to cut down ? Find a friend or make one :<0)

Originally Posted by 10Pups

You may be able to cut scales with that but you are not going to have much success cutting slabs. You have a pile of nice scrap to cut down ? Find a friend or make one :<0)

Also, check with your local VoTech ( Vocational Technology School)! They often have very cheap evening woodworking classes that will allow you to enjoy good tools without owning them. Some High Schools do also. I did that for years when i was often re-located around the country.
In service? go to the base hobby shops!
~Richard
A well adjusted table top hobby type 8" bandsaw will work well also. There are two and three wheel machines available and always at local online auctions for $40 or less.They cut to about 4" of thickness. Just feed the stock slowly. A good idea is to use a thin wedge in the saw kerf behind the blade to keep the material from binding the blade. Make it out of a craft stick or similar and just make a long taper on the flat to a edge.

I also use a bandsaw. Mine was designed for resaw work. If you didn't have the intention of opening a cabinet shop I can't see laying out the cash. In my case, previously had a cabinet shop. I'm sure ask a friend for help is the best advice here.