Results 1 to 10 of 67
Thread: Matching up scale halves
Threaded View
-
06-03-2014, 06:04 PM #17
Back on track, Unpinning the other razor. The tops of the pins are lightly dremel-drumed so the bit won't walk. Always use split-tip bits!!
Bringing the razor up to the spinning bit, changing angles to get to center and stay there!
If done perfectly, the peened part of the pin will climb up the bit like a collar. Wiggle and wobble, keep drilling until it comes apart!
No punches or hammers here! Grasp the pin from the inside of the scale and lightly twist back and forth, push out. Then grab it from the outside, twist, pull till free. Be gentle!
Ready now to mod the tips of these to match the other one!"Don't be stubborn. You are missing out."
I rest my case.
-
The Following 4 Users Say Thank You to sharptonn For This Useful Post:
Leatherstockiings (09-24-2015), MikeT (07-15-2015), Neil Miller (06-04-2014), RezDog (06-03-2014)