Thread: Wade and butcher celebrated pin replacement

Many of the old Sheffields have large or oblong pivot holes. There are a few ways to address it. You can go with the oversized pin, the standard size pin is 1/16". You can put a sleeve in the hole or you can fill the hole with JB Weld or similar an then re drill the hole at 1/16" in the filler, or you can just leave it. There is instruction in here http://straightrazorpalace.com/works...zed-pivot.html
The main sticky for how to stuff is here
http://straightrazorpalace.com/works...wers-here.html