The Butchered Blade

Printable View

Show 40 post(s) from this thread on one page

08-29-2015, 12:54 AM
engine46

outback:
Ok Tom ?
Cause thats as far as I'm going.
I can bend and twist it easily.
Will have better strength once i CA them.

Remember, you've never made any. And wood is not as tough as bone,ivory or horn.
The original thickness was 1/8 th inch.

Im done for the nite, got to get my gear ready for tomorrow nites tournament.
So off to the shower, and see how this new knot works.

Mike, I know you were referring to Tom but that looks great to me. The straight should look very nice! :rock:
08-29-2015, 02:55 AM
outback

2 Attachment(s)

Quote:

Originally Posted by sharptonn

Sweet, Outback! :D

Thanks guys.
I sure wish i knew who made this knot, might have to get a couple more.
Can you say, cool whip!Attachment 210391 Attachment 210392
Pulled off a spectacular BBS shave tonite, truly a BBS shave.
Wife said it was axactly like a baby's butt. I must credit my 5 soap concoction, wich contains equal amounts of.
Williams mug
VDH luxery
SRD lime
SRD west indies
Seifenglatt Bordeaux, that soap is the reason for mixing the soaps together.
It smelled like rancid crisco, and left my boar brush smelling worse than it did when it was new.
But when combined together, it became the best cushion&glide soap I've ever used.

Can't stop faceterbating myself.
WOW THAT'S NIIIIICE!!

Quote:

Originally Posted by engine46

outback:
Ok Tom ?
Cause thats as far as I'm going.
I can bend and twist it easily.
Will have better strength once i CA them.

Remember, you've never made any. And wood is not as tough as bone,ivory or horn.
The original thickness was 1/8 th inch.

Im done for the nite, got to get my gear ready for tomorrow nites tournament.
So off to the shower, and see how this new knot works.

Mike, I know you were referring to Tom but that looks great to me. The straight should look very nice! :rock:
08-29-2015, 03:38 AM
MikeT

Quote:

Originally Posted by guitstik

You can get different grit sanding wheels that can be chucked up in a cordless/corded drill that will do a nice job of sanding as opposed to doing it by hand. They are composed of individual strips of sand paper. I start off at 60 and 80 grit then move to finer grits by hand on a short piece of PVC pipe.

I'd like to see a pic :D I'm willing to try anything. When it comes to pitting, the greaseless on those soft wheels grabs the pit and digs it out, you guys already know that issue, I just learned it. Now if it was more rigid.. what your taking about sounds like a cheap and easy rigid grinder. I could have it wrong. It sounds good though..
Thanks for the tip.
08-29-2015, 04:13 AM
outback

2 Attachment(s)

Quote:

Originally Posted by MikeT

I'd like to see a pic :D I'm willing to try anything. When it comes to pitting, the greaseless on those soft wheels grabs the pit and digs it out, you guys already know that issue, I just learned it. Now if it was more rigid.. what your taking about sounds like a cheap and easy rigid grinder. I could have it wrong. It sounds good though..
Thanks for the tip.

Here's what i use , to sand with.
It's a Christmas ornament eraser on a pencil. I've never measured it but roughly three quarters of an inchAttachment 210396 Attachment 210397
08-29-2015, 04:24 AM
guitstik

Quote:

Originally Posted by MikeT

I'd like to see a pic :D I'm willing to try anything. When it comes to pitting, the greaseless on those soft wheels grabs the pit and digs it out, you guys already know that issue, I just learned it. Now if it was more rigid.. what your taking about sounds like a cheap and easy rigid grinder. I could have it wrong. It sounds good though..
Thanks for the tip.

I will try to get some pictures up even if I have to email them to myself to route it onto my computer. I have got to figure this out.
08-29-2015, 04:25 AM
MikeT

Gonna have to find myself one of those!
08-29-2015, 04:31 AM
outback

Not sure where I got it but I figure Wally World I'll have them here soon. I thought about making a mold and filling it with silicone then I can remove it and cut it in. to sections as long as that one. Something like a pill bottle would work as a mold being that I'm looking at one right now
08-29-2015, 04:34 AM
engine46

Quote:

Originally Posted by guitstik

I will try to get some pictures up even if I have to email them to myself to route it onto my computer. I have got to figure this out.

I have to email thing to myself all the damn time because when I try to post something with some pics, the pics don't come through unless I reboot. I don't get it. It only does t sometimes. I got it to work awhile ago in another thread but I deleted it right away because I took the pics with my iPhone & when I got them in my computer, I had to turn the pics but when I posted them, they were sideways, so I had to take pics with my digital camera instead so I email everything I wrote to myself & I'm about to reboot my computer. What a pain in the @ss!
08-29-2015, 04:41 AM
outback

Quote:

Originally Posted by engine46

I have to email thing to myself all the damn time because when I try to post something with some pics, the pics don't come through unless i reboot. I don't get it. It only does t sometimes. I got it to work awhile ago in another thread but I deleted it right away because I took the pics with my iPhone & when I got them in my computer, I had to turn the pics but when I posted them, they were sideways, so I had to take pics with my digital camera instead so I email everything I wrote to myself & I'm about to reboot my computer. What a pain in the @ss!

Kick it a few more times Steve
Boot and reboot. Or my favorite.
[emoji375] [emoji379] [emoji378]
08-29-2015, 04:45 AM
engine46

Quote:

Originally Posted by outback

Kick it a few more times Steve
Boot and reboot. Or my favorite.
[emoji375] [emoji379] [emoji378]

Sometimes it just drives me to....................never mind! :needcoffee:

Show 40 post(s) from this thread on one page