Thread: To Unpin or Not to Unpin, That is My Question

Saving the collars takes practice. This is why you should start with junkers or razors that you don't care if you destroy the collars or scales. As unpinning can be tough to do cleanly. I use a drill press and centering bits. A device to hold scales, magnification, and a bright light. But that's what I need to do the job. Not everyone has to go that far. I try and reuse all collars. Even just the tiny cups as they can be saved and reused too.
Here is a tip for ya. Polish the collars before unpinning. This saves you a lot of work trying to hold the tiny little bastards for cleaning when they are loose.

Collars can be easily made at home and there should be threads about that on here. Also you can buy replacement collars, even fancy ones, on oboy.

Bob

Originally Posted by BobH

Collars can be easily made at home and there should be threads about that on here. Also you can buy replacement collars, even fancy ones, on oboy.

Bob

This has been my solution so far.

A large part of me thinks that all of the fuss of saving collars and stuff is a bit unnecessary, since I can buy very similar replacements online...

But another part of me is a big snob that wants as much of my razors as possible to be original parts.

I'm just figuring out the cost/benefit analysis of which part is worth listening to...

Originally Posted by skald

This has been my solution so far.

A large part of me thinks that all of the fuss of saving collars and stuff is a bit unnecessary, since I can buy very similar replacements online...

But another part of me is a big snob that wants as much of my razors as possible to be original parts.

I'm just figuring out the cost/benefit analysis of which part is worth listening to...

Consider that straight razors were just tools not even valuable enough to have serial numbers and made in the thousands if not millions. Being all original does not matter much. The only exceptions that I can think of is if you are buying NIB razors or a very rare specimen. In most cases I would not loose any sleep over the decision and do what is convenient.

Bob

Originally Posted by BobH

Consider that straight razors were just tools not even valuable enough to have serial numbers and made in the thousands if not millions. Being all original does not matter much. The only exceptions that I can think of is if you are buying NIB razors or a very rare specimen. In most cases I would not loose any sleep over the decision and do what is convenient.

Bob

This is totally accurate... But worthless object + time = priceless artifact.

Broken pot shards and bone fragments that were literally tossed in the fire are now invaluable lenses into ancient ways of life. Bills of lading that were used to wipe people's butts are now priceless sources of information.

So you're right - they're just things, but dealing with old things always has a more complicated set of choices.

I realize that a 100 or 200 year old razor isn't the Rosetta stone or the Gilgamesh tablets or anything, but they're still more valuable as artifacts than they were as manufactured items originally.

Then again, cleaning without unpinning is a giant pain in my ass, so there's also that...

XD

Old n rare....yes, save the collars. Others are a dime a dozen.

I use a rechargeable screw driver with the 1/4" adapter, that excepts the 1/4" lugged drill bits, for drilling pins. A magnifying glass so to see I'm keeping it centered.

Once the collar comes off, I use a 1/16" drift punch to push the pin thru.

I've had no luck with using a drill press.

Go slow, and check with magnification...its that easy.

Originally Posted by skald

This is totally accurate... But worthless object + time = priceless artifact.

Broken pot shards and bone fragments that were literally tossed in the fire are now invaluable lenses into ancient ways of life. Bills of lading that were used to wipe people's butts are now priceless sources of information.

So you're right - they're just things, but dealing with old things always has a more complicated set of choices.

I realize that a 100 or 200 year old razor isn't the Rosetta stone or the Gilgamesh tablets or anything, but they're still more valuable as artifacts than they were as manufactured items originally.

Then again, cleaning without unpinning is a giant pain in my ass, so there's also that...

XD

Have it your way. I still think you are placing too much value on a common artefact that is still in production.

Bob

Just think.......All that gunk, filth and muck in there is OTHER people's crud. YUK!!! You have the skills, so unpin 'em and clean 'em out thoroughly. It's my crud or no crud.

Originally Posted by BobH

Have it your way. I still think you are placing too much value on a common artefact that is still in production.

Bob

I find it interesting that straight razor users/collectors place such a premium on the blade but not the scales.

Originally Posted by BobH

Have it your way. I still think you are placing too much value on a common artefact that is still in production.

Bob

Haha! I think it's pretty clear that it is not the rational part of me that cares.