Quote Originally Posted by onimaru55 View Post
I think you could have left the toe alone & there was no need to grind away on the tang & stabiiiser as that part of the razor shouldn't touch the stones anyway. Possibly you could have just curved in a bit deeper bringing the heel further forward.
You may have been able to correct that slight frown in the honing process. Don't think a belt sander was necessary.
Just accept that you won't get an edge all the way to the heel with something so worn..

If you start your sharpening at about 45º & gradually lower it you'll save some spine metal.
I have no idea how you would get that much of a frown out in the honing process.