Thread: Am i cheating?

They've peened for centuries and it's still the most aesthetically for a razor, if done properly. It has worked for centuries so I don't see a need to change.

It's also easier to rectify small issues with razors not fully centering when peening.

That's one of the main negatives when using a pivot barrel with the 2 torx screws. If the blade is not straight you have some problems. So for the new custom razor makers it's easier to use those as they can easily pre drill the pivot hole to 1/8" and in general those new razors are straight to start with.

Some also use a long torx screw with a flat hex nut to tighten it all. Aesthetically not as beautiful but easy to apply.

The micro fasteners are a bit bulky at the head and nut but when I do use them when requested I sand them down a bit and use the blue loctite.

All have their pros and cons.