Thread: Removing Etching From Blade

Originally Posted by niftyshaving

Brand new... hmmm....

Anything that will make it gone will also
make the razor dull. Do little or nothing until it needs
honing.

I might recommend

Pick up a tube of MAAS or Simichrome Polish
a drop on both sides and rub with a pinch of bathroom tissue
and see what happens. If the etch is shallow this
will calm it down. If it is not shallow hand sand with
3M wet dry perhaps 1K or 2K but his will almost always
dull the edge.

thanks for the tip I just might try the above suggested. .