Thread: Wooden Scale Advice

Originally Posted by fast14riot

is the wood you have already in scale thickness slabs, or just a block? Either way, make sure that the indide faces are FLAT. A piece of glass, granite counter top, marble tile, etc, with sandpaper taped to it works well if you don't have a disc grinder. Lightly glue those two surfaces together with a few drops of wood glue and a piece of printer paper between them. Draw your pattern on the wood, or glue a paper pattern to it. Profile and drill both sides together at once. Use a drill press, its more accurate than your eyes and a hand drill. After drilling and profiling, split them apart. Sand away the glue spots. Start shaping and make your wedge. Finish your scales befoe pinning together. That means all buffing, too. Pin the wedge first, then the pivot. Look up Glenn's (gssixgun) video on pinning scales if you need more advice, its almost 30minutes long, and worth it.


It doesn't take long once you have done a few, but the first one is always nerve wracking.

Good luck and take picture!


-Xander

I currently have a block of the wood. I do have a disc sander, which will work for flatening. I also have a disc grinder, drill press, which will also be nice. Thanks for the advice!

I will take a picture!!

Parker

JMO, wood is great,wood is wonderfull,but not the best meterial for scales,unless you can buy stabilized wood,which is than a sort of plastic.

Originally Posted by pixelfixed

JMO, wood is great,wood is wonderfull,but not the best meterial for scales,unless you can buy stabilized wood,which is than a sort of plastic.

I know it is not the best, but in my situation it is the cheapest and looks the best for the price.

Originally Posted by pixelfixed

JMO, wood is great,wood is wonderfull,but not the best meterial for scales,unless you can buy stabilized wood,which is than a sort of plastic.

Curious statement. Why don't you think wood is good for scales?


-Xander

Originally Posted by fast14riot

Curious statement. Why don't you think wood is good for scales?


-Xander

Was wood used back in the day? (not much) ask yourself why plastic (all phenolics) natural materials such as Horn,Ivory,Bone were used as was bakalite and hard rubber,simple answer,they are impervious to water.
Stabilized (plastisized wood is a differant animal)
were the materials of choice

I just think that for the cost wood scales look the best

Originally Posted by pixelfixed

Was wood used back in the day? (not much) ask yourself why plastic (all phenolics) natural materials such as Horn,Ivory,Bone were used as was bakalite and hard rubber,simple answer,they are impervious to water.
Stabilized (plastisized wood is a differant animal)
were the materials of choice

Yes that explain back then, but not now. They also didn't have polymer finishes, spray on finishes, self leveling finishes. There is no reason nowadays that wood scales should be inferior to any other scale material. I say use wood, or plastic or the boss' clip board! I don't feel any one material is any "better" than the rest as a scale material, just how you work it and finish it is different.

To the OP, a great way to add a little style to straight grain wood scales is to cut at an angle across the grain, say maybe 20-30 degrees. Walnut is great stuff to work with, I lik either Tru-Oil for a hand rubbed oil finish, or CA glue which can give the glass like finish.


-Xander

Originally Posted by fast14riot

Yes that explain back then, but not now. They also didn't have polymer finishes, spray on finishes, self leveling finishes. There is no reason nowadays that wood scales should be inferior to any other scale material. I say use wood, or plastic or the boss' clip board! I don't feel any one material is any "better" than the rest as a scale material, just how you work it and finish it is different.

To the OP, a great way to add a little style to straight grain wood scales is to cut at an angle across the grain, say maybe 20-30 degrees. Walnut is great stuff to work with, I lik either Tru-Oil for a hand rubbed oil finish, or CA glue which can give the glass like finish.


-Xander

That's a good idea! And some CA glue would give a awesome finish!!! How do I apply it evenly though?

Carry on,I just feel the old ways are the best ways.

Originally Posted by parkerskouson

That's a good idea! And some CA glue would give a awesome finish!!! How do I apply it evenly though?

Either dip in a large bottle or sand down three heavy coats that have been spread around (quickly!) With a paper towel. I usually do the later. Start sanding at 400 after th CA dries, then proceed up to 2000 or so, then use either white or pink scratchless compound on a sewn wheel. If working by hand, neverdull polishing wadding, or a marine grade "fine" rubbing compound will bring out the shine and a plain T-shirt buff after.


-Xander