Page 1 of 2 12 LastLast
Results 1 to 10 of 41
Like Tree11Likes

Thread: Hello and help.

Hybrid View

BennUK Hello and help. 12-28-2013, 01:04 PM
PigHog Most people seem to buy a... 12-28-2013, 01:27 PM
BennUK I've looked for so long... 12-28-2013, 01:30 PM
PigHog It seems that with Dovo... 12-28-2013, 01:38 PM
PigHog Some people might disagree... 12-28-2013, 01:50 PM
BennUK This is hard haha, and seems... 12-28-2013, 03:35 PM
bombay hello and welcome, the... 12-28-2013, 01:39 PM
edhewitt Have you considered a vintage... 12-28-2013, 08:34 PM
BennUK Considered, yes. However I... 12-28-2013, 10:01 PM
Highwayman When you say your budget... 12-28-2013, 01:39 PM
  1. #1
    Junior Member BennUK's Avatar
    Join Date
    Dec 2013
    Location
    Warwickshire or Lancaster,UK
    Posts
    21
    Thanked: 0

    Default Hello and help.

    Hello,

    Quite fancied getting myself a straight razor for a while now, and since I've got some xmas money I thought now is the time.

    I've been doing lot's of reading and searching and think I've found a razor I want, just wanted your thoughts.

    Dovo "Best Quality" 6/8" Carbon Steel Straight Razor | eBay

    Will this be suitable do you think?

    I'm 19 from the UK by the way.

    I have a budget of about £50 for the razor (80-90 USD)

  2. #2
    Senior Member PigHog's Avatar
    Join Date
    Nov 2012
    Location
    London, UK
    Posts
    810
    Thanked: 70

    Default

    Most people seem to buy a Best Quality as their first razor, so you're fine there.

    Don't forget you've got another £8 shipping on that—can't you find any UK sellers?

    I was going to recommend The Invisible Edge, except all the Best Qualities are out of stock. Maybe you know what you're doing, already...

  3. #3
    Junior Member BennUK's Avatar
    Join Date
    Dec 2013
    Location
    Warwickshire or Lancaster,UK
    Posts
    21
    Thanked: 0

    Default

    I've looked for so long looking for UK sellers, don't know why there seems to be so little demand.

    Do you think it will be shave ready? I've asked the seller a question but are dovo usually SR usually?

  4. #4
    Senior Member PigHog's Avatar
    Join Date
    Nov 2012
    Location
    London, UK
    Posts
    810
    Thanked: 70

    Default

    It seems that with Dovo razors it's just down to luck. None of them are professionally honed, unless the seller says otherwise, but sometimes the factory sharpening is ok, and other times it's crap (I bought a Dovo Flowing which shaved fine right out the box...or maybe that was just my ignorance).

    The likelihood is that you'll need to get it properly honed but there are a number of good guys over here that you can send it to, for not too much money—The Invisible Edge, Neil Miller, Tony Holmes at Taylors 1000 (don't actually know if he has a honing service but he's done a couple of blades that I bought from him and they shaved very well...at least until I chipped one of them ).

    It does start to over-complicate things a bit, but it's well worth the time and effort to start out properly.

  5. The Following User Says Thank You to PigHog For This Useful Post:

    BennUK (12-28-2013)

  6. #5
    Senior Member PigHog's Avatar
    Join Date
    Nov 2012
    Location
    London, UK
    Posts
    810
    Thanked: 70

    Default

    Quote Originally Posted by BennUK View Post
    I've looked for so long looking for UK sellers, don't know why there seems to be so little demand.

    Do you think it will be shave ready? I've asked the seller a question but are dovo usually SR usually?
    Some people might disagree with me here, but there's always the option of buying a vintage razor.

    Tony Holmes (Taylors 1000 on eBay) is a very good seller (and a generally good bloke too, from my dealings with him). His photos are very good and descriptions are matter-of-fact and easy to rely on. He'll answer any of your questions and if it is being listed as not shave ready, he'll probably hone it for a bit of extra money, too.

    Just look out for one that he says has minimal hone wear and that the scales and everything are all fine, and you'll be good to go. You might pay between £20 and £50.

    He's always got razors listed (though a few less now, over the holidays) so just keep an eye out for one you like.

  7. #6
    Junior Member BennUK's Avatar
    Join Date
    Dec 2013
    Location
    Warwickshire or Lancaster,UK
    Posts
    21
    Thanked: 0

    Default

    This is hard haha, and seems very expensive.

    Oh that pains of being a student.

    Anyone know of a decent full kit?

    A lot of the classifieds look good but shipping is too much, are there any UK based classified I can look?

    Looked at taylors1000 there's only one that is SR atm but will look back periodically.

    Quite like this one Klas Tornblom razors , will this be shave ready?

    EDIT

    Also the £71.38 one on http://www.dovorazors.com/stockrazors.html looks pretty good, but doesn't mention if it's honed and SR?

    Found this too, http://www.executive-shaving.co.uk/e...tarter-kit.php, thoughts?
    Last edited by BennUK; 12-28-2013 at 04:58 PM.

  8. #7
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,350
    Thanked: 3228

    Default

    BennUK

    Welcome to the forum. You mentioned your budget for a straight razor but no mention of your budget for a brush, soap, strop and for sending it out to be honed. You would be surprised how easily and frequently you can dull a razor when you are just starting out, I was. Just saying there is more to the initial outlay than just getting a shave ready straight that should be taken into consideration in a budget. Anyway just a thought and not meant to discourage you from pursuing straight razor shaving.

    Bob
    Life is a terminal illness in the end

  9. #8
    Mortal Member bombay's Avatar
    Join Date
    Aug 2012
    Location
    Newcastle Upon Tyne
    Posts
    613
    Thanked: 75

    Default

    hello and welcome,
    the thing about that razor on ebay is it only has the factory edge on it so you will have to pay more to get it honed once it arrives.
    the ones sold on invisible edge are shave ready. Dovo Razors
    there are two on there at 70ish
    on the other hand if you decide to get the ebay razor, one of the more experienced members may be willing to hone it for you.

    the classifieds here have some nice vintage razors for even cheaper, that would probably be your best bet, i know what i would do

    Pete
    Last edited by bombay; 12-28-2013 at 01:42 PM.
    Net.Wt.7oz

  10. #9
    Senior Member blabbermouth edhewitt's Avatar
    Join Date
    May 2013
    Location
    Perth Australia
    Posts
    7,741
    Thanked: 713
    Blog Entries
    1

    Default

    Have you considered a vintage razor, there may be something shave ready in the classifieds well within your budget.
    Bread and water can so easily become tea and toast

  11. #10
    Junior Member BennUK's Avatar
    Join Date
    Dec 2013
    Location
    Warwickshire or Lancaster,UK
    Posts
    21
    Thanked: 0

    Default

    Considered, yes. However I don't know enough of what to look for and am slightly weary of getting just from the web. I googled for local stores around me and can't seem to find any.

    Classifieds seem to be the obvious choice but these are either too high end or the shipping is too much, and again I don't know what is good and what it will be like once you get it.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •