Page 1 of 4 1234 LastLast
Results 1 to 10 of 32
Like Tree1Likes

Thread: Is anyone using Okudo Suita for finishing hone?

  1. #1
    Member
    Join Date
    Oct 2010
    Posts
    58
    Thanked: 9

    Default Is anyone using Okudo Suita for finishing hone?

    Hello Every body I am new to this forum so if I am doing anything wrong please let me know. l.o.l.

    I just got this hone ( I was told it is Okudo Suita) and wonder what would be the best way to use it as final hone perhaps after Escher.

    With Nagura , no Nagura , just water? etc.

    Thank you in advance for you advise.
    Attached Images Attached Images       

  2. #2
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    After Escher?
    interesting.
    Do you really think you need edge finer then escher you own?
    i have honed a lot razors and never ever had any complaining about the edge .
    i finish every single of them an Escher.
    you may need to spend a little more time with Escher?
    gl

  3. The Following User Says Thank You to hi_bud_gl For This Useful Post:

    Disburden (10-28-2010)

  4. #3
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,626
    Thanked: 3749

    Default

    Strictly as a finishing stone use a diamond plate to create a light slurry. That way you are not introducing coarser particles from Nagura.

    Okudo Suita can be finer than an Escher but also maybe not. Depends on the individual stones. You need to assess the scratch pattern of both of your own stones under magnification. Odds are they will be interchangeable as finishers but Suita are fast cutters & maybe a little more versatile. Have fun.
    The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.

  5. #4
    I Bleed Slurry Disburden's Avatar
    Join Date
    Feb 2009
    Location
    Carmel, NY
    Posts
    2,458
    Thanked: 545

    Default

    I agree that an escher could be all you need as its very keen but jnats can feel nicers to the skin so see what you think is better without being distracted by the mystique of the stone.

    My jnat feels really nice on my face but my escher does feel sharper when shaving.
    Could be just a preference thing!

    Either way both hones take months of experience to get good at so take your time. I use nagura stones, make sure your last one is tomo nagura or use a dmt 325 plate to make mud.

    WELCOME! Enjoy the forum
    Last edited by Disburden; 10-28-2010 at 03:02 AM.

  6. #5
    Member ZethLent's Avatar
    Join Date
    Aug 2007
    Location
    Japan
    Posts
    658
    Thanked: 335

    Default

    Let me start by saying, Beautiful Hone!!

    I use an Ohira suita as a final finisher and it is the best I have used out of all of the j-nat that I have previously owned.

    As to its suitability to be a final polisher, you are going to have to put it through some honing tests. It might take a few weeks to find the time to do them all but afterwards you will have a good idea as to its overall suitability.

    Try it without a slurry and lots of water. Try it wilth a spritz of water and hone nearly dry. Try it with a light slurry. Try it with a medium slurry. Try it with a heavy slurry. Try it with a slurry and hone until it gets thick, then water it down with a light spritz of water; repeat as many times as it needs to gain a uniform colour to the bevel.

    I have found that my suita is as excellent a finisher as anyone can get. Have fun with it. Don't rush it and flub the results and get rid of it before you know what it is capable of.

    I wouldn't use any Mikawa Nagura on it as the particles may not completely wash off (getting trapped in one of the 'su' pockets).
    笑う門に福来たる。

  7. #6
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Oh so you are the lucky owner of that very rare stone, congrats.
    As mentioned above test it well and soon enough you will find out if the stone is good for razors.

    You can calibrate the test so to say by finishing your razor on a hone you know gives a very good edge, for example 8k norton, or 12k Super Stone or something else. For me I know that 12k Super Stone gives me almost the edge I like, so my test is to see if the stone can improve that edge. I use slurry, no slurry, dilution , etc until I find what works best, or if the stone just does not improve the edge.

    Have fun.
    gabrielcr78 likes this.
    Stefan

  8. The Following User Says Thank You to mainaman For This Useful Post:

    Disburden (10-29-2010)

  9. #7
    Member
    Join Date
    Oct 2010
    Posts
    58
    Thanked: 9

    Default

    Thank You for all the info. Just tried my stone tonight for the first time and I love it. Feels very nice, to be honest I never had such a smooth shave before. All I did is just use soap and water and my Wapi was very happy. Seems to me like the Escher/Okudo combination works very well so far.Thanks again.

  10. The Following User Says Thank You to UrsaMaior For This Useful Post:

    hi_bud_gl (10-29-2010)

  11. #8
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    Thank you now we have to go find Okudo DARN.

  12. The Following User Says Thank You to hi_bud_gl For This Useful Post:

    Disburden (10-29-2010)

  13. #9
    Member ZethLent's Avatar
    Join Date
    Aug 2007
    Location
    Japan
    Posts
    658
    Thanked: 335

    Default

    Quote Originally Posted by hi_bud_gl View Post
    Thank you now we have to go find Okudo DARN.
    Sham, here is some motivation to fuel your suita desires:

    Okudo Suita (retail price $1000)




    Nakayama Maruka Suita (retail price $2500)




    And one like mine, Ohira 'Renge' Suita (retail price $1500)

    笑う門に福来たる。

  14. #10
    Member ZethLent's Avatar
    Join Date
    Aug 2007
    Location
    Japan
    Posts
    658
    Thanked: 335

    Default

    Don't think that all Okudo suita cost that much though. That one (above pic) is very hard, fine, and large. But Okudo is the premier name in suita (you wouldn't know it next to the Nakayama one though). Enjoy yours if you have one.
    笑う門に福来たる。

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •