Hone of the Day

Here is a Piece Of Slate or POS for short. With water alone it does not cut.
http://i.imgur.com/xvqg2io.jpg

It dulls the edge with a heavy slurry. It's no use to use oil because it does not cut. You are better off spending your time stropping on good leather.
Mike
http://i.imgur.com/UUVoYXc.jpg

This one I did first thing this morning watching the news
I REALLY like using bench strops with Kamisori :p


Nakayama with a Icantremember Kiita for slurry, after the Chosera 1-5-10 to correct the bevel

http://i.imgur.com/HyGpORW.jpg

CeOx Bench strop and Leather Bench strop

http://i.imgur.com/t47gj56.jpg


Hone On !!!

:idea:
Tosuke touch up on Nakayama Kiita.

Attachment 263386
The blade looks kind of funky in the pic because it's still wet.

Yet another 14 on the hones today I don't know why but these 14s seem to be dropping through my door every week, I have honed many razors for the owner of this particular razor and I have to say he must have one of the best collections of Filarmonica Iberia and Palmera razors I've ever seen.

http://i.imgur.com/WkfucfE.jpg

I soooo want a razor like that!! Waaay too expensive for my blood.
And you get them like they are a dime a dozen....:rock:

First post on this thread. First of all I would like to give a shout-out to Randy and Rod for taking time and instructing me. Thank you guys.
I got this Cape 650 off the internet. The blade has pitting and there was some rust on the bevel but only superficial. I used an Atoma 1200 to clean it and then on to Chosera 1K. Mid range work on Ohira suita until all scratches were gone. Following the instructions that Mainaman gave me I went on Koma then tomo on a Nakayama.
Sharp and smooth:)

Attachment 263435

Attachment 263443

Quote:

---

Originally Posted by alex1921

First post on this thread. First of all I would like to give a shout-out to Randy and Rod for taking time and instructing me.

---

Looks like you may have brushed the edge against your finger nail. Just above the blue dot it looks lower than the rest of the edge but otherwise,nice looking edge.

Quote:

---

Originally Posted by onimaru55

Looks like you may have brushed the edge against your finger nail. Just above the blue dot it looks lower than the rest of the edge but otherwise,nice looking edge.

---

Thank you. Not sure what happened there but I looked at the edge again and found a chip on the toe so back to the stones in the morning :)

Quote:

---

Originally Posted by Phrank

Sheffield steel and Thuri's were born for each other, meant to be, starcrossed and always betrothed...there is no other edge I'd ever have on my Sheffield razor....period.

---

Its what "all" my razors are finished on.

Quote:

---

Originally Posted by outback

Its what "all" my razors are finished on.

---

I shaved off it last night..
My face will require some time to recover,I shredded it.
100 laps was a stupid test.
Re honed it, then did 20 laps.
My God it's is ready now...
Roll on Saturday :)