Results 1 to 10 of 36
-
06-16-2017, 02:43 AM #1
- Join Date
- Sep 2016
- Location
- West Virginia
- Posts
- 14
Thanked: 0How do you tell if you have a frown
I was wondering what the easiest way to tell if you have a frown was
-
06-16-2017, 02:49 AM #2
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,552
- Blog Entries
- 1
Thanked: 3795In front of a bright light, gently place the edge of the razor onto the top of a confirmed flat hone with the razor perpendicular to that surface. Look for any light coming through the gap between the edge and the hone. Any frown(s) will be obvious.
-
-
06-16-2017, 02:53 AM #3
IF your razor isn't shave ready, it's fairly easy. Place the edge down on a flat surface that has light coming from behind. If there is light coming from the middle and not the ends it's frowning. If there's no light in the middle but light at the ends, it's probably smiling and if there's no light all along the edge, then the edge is straight.
I would use a piece of glass, mirror or such as the flat area as it doesn't get much flatter than that. If there are reflections in the way a piece of dark paper could be used.
Over Simplistic? Yup! But it will work.
OH! If the Razors shave ready then you need to be very careful so you don't mess up the edge.Our house is as Neil left it- an Aladdins cave of 'stuff'.
Kim X
-
06-16-2017, 02:57 AM #4
- Join Date
- Sep 2016
- Location
- West Virginia
- Posts
- 14
Thanked: 0So there shouldn't be any light coming through at all
-
06-16-2017, 02:59 AM #5
-
The Following 4 Users Say Thank You to cudarunner For This Useful Post:
Dachsmith (08-30-2018), Hirlau (06-16-2017), Mrchick (06-16-2017), randydance062449 (06-16-2017)
-
06-16-2017, 03:15 AM #6
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 8,023
- Blog Entries
- 1
Thanked: 2209The only thing I can add is to use a very BRIGHT! light. Anything less can give false positives. Been there, done that.
Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin
-
The Following 2 Users Say Thank You to randydance062449 For This Useful Post:
cudarunner (06-16-2017), Hirlau (06-16-2017)
-
06-16-2017, 03:22 AM #7
Look in the mirror. Sorry, Couldn't help myself.
The pic that Roy put up should help. Its not too hard to find out. Good luck and dont ruin a sharp edge.It's just Sharpening, right?
Jerry...
-
06-16-2017, 03:34 AM #8
- Join Date
- Sep 2016
- Location
- West Virginia
- Posts
- 14
Thanked: 0If anyone will share an email address, I could send a picture of what I got
-
06-16-2017, 03:37 AM #9Our house is as Neil left it- an Aladdins cave of 'stuff'.
Kim X
-
06-16-2017, 03:42 AM #10
- Join Date
- Sep 2016
- Location
- West Virginia
- Posts
- 14
Thanked: 0hopefully it worked lol