Results 1 to 10 of 80
Like Tree140Likes

Thread: Bevel setting issue in the middle

Threaded View

Mikali Bevel setting issue in the... 07-31-2017, 07:50 AM
Brontosaurus Sounds like you may have a... 07-31-2017, 08:23 AM
rodb Check the blade for a frown,... 07-31-2017, 08:27 AM
Mikali I was given the advise to... 07-31-2017, 08:33 AM
ovidiucotiga The frown in the middle could... 07-31-2017, 10:02 PM
ovidiucotiga 269845 Ok so i read the... 07-31-2017, 11:13 PM
JOB15 Have you tried inking the... 07-31-2017, 08:25 AM
Mikali Fyi ... 07-31-2017, 08:56 AM
Brontosaurus That's nothing. Just hone... 07-31-2017, 09:58 AM
Mikali Using ordinary 40 circles... 07-31-2017, 10:05 AM
Brontosaurus From the shot in silhouette,... 07-31-2017, 10:35 AM
Sdm84 If you are just starting out... 07-31-2017, 11:17 AM
Mikali Thanks so far. I've put down... 07-31-2017, 11:37 AM
Mikali Tried my best to make some... 07-31-2017, 11:49 AM
BobH If you compare the bevel one... 07-31-2017, 12:06 PM
Brontosaurus Thanks for posting the... 07-31-2017, 12:18 PM
Steve56 It may also be overground in... 07-31-2017, 12:58 PM
gssixgun That is a Red Flag for me,... 07-31-2017, 02:49 PM
Mikali What I'm doing is mimic what... 07-31-2017, 03:49 PM
gssixgun Trust me here they are not... 07-31-2017, 04:04 PM
Mikali Ok thanks. Will give that a... 07-31-2017, 04:07 PM
rodb Another more brute force... 07-31-2017, 04:51 PM
Brontosaurus From the pix, that blade... 07-31-2017, 05:08 PM
gssixgun Yes If applied correctly... 07-31-2017, 06:48 PM
Mikali Thanks very much for your... 08-01-2017, 03:39 PM
Utopian "ANY ABNORMALITY IN BEVEL... 08-01-2017, 04:05 PM
Steve56 Ron is exactly right for... 08-01-2017, 06:08 PM
Mikali Ok, magic marked the edge... 08-01-2017, 06:43 PM
Steve56 That's OK - it's a good way... 08-01-2017, 07:44 PM
Utopian Hey Bruno, could you please... 08-03-2017, 01:07 AM
Mikali http://i1268.photobucket.com/a... 08-01-2017, 08:05 PM
rodb I've honed 3-4 Dovo's... 08-01-2017, 08:20 PM
ovidiucotiga Steve 56 and... 08-01-2017, 08:32 PM
Steve56 No worries! We're all here to... 08-01-2017, 09:45 PM
Marshal Looks almost exactly like my... 08-01-2017, 10:46 PM
Mikali I can imagine it took a while... 08-02-2017, 06:53 AM
outback Here's a thought..! I have a... 08-02-2017, 10:49 AM
Utopian In reading through this... 08-02-2017, 12:24 PM
Mikali + 1 :) I don't see alot of... 08-02-2017, 12:28 PM
BobH I don't know if this is what... 08-02-2017, 12:55 PM
Marshal Basically what BobH said,... 08-02-2017, 04:39 PM
Brontosaurus I don't use the term myself. ... 08-02-2017, 04:48 PM
Mikali Ok went back to the dovo.... 08-03-2017, 08:14 PM
Mikali And as expected it wasn't the... 08-04-2017, 01:57 PM
Marshal If you have a problem blade... 08-04-2017, 05:42 PM
gssixgun Even more Ideas :) ... 08-04-2017, 06:36 PM
Mikali Mehehe most important thing... 08-04-2017, 06:49 PM
Mikali Cheaper as a Dovo for sure... 08-04-2017, 08:01 PM
Mikali I do have another question... 08-04-2017, 08:28 PM
Marshal Refresh top layer often, use... 08-04-2017, 08:57 PM
Mikali Test shaved this morning, WTG... 08-05-2017, 08:17 AM
gssixgun That is EXACTLY what I do ... 08-05-2017, 02:42 PM
outback If the bevel is set, then... 08-07-2017, 11:59 AM
ovidiucotiga When the blade is not... 08-07-2017, 12:39 PM
outback [QUOTE=gssixgun; But... 08-07-2017, 05:15 PM
Mikali [QUOTE=outback;1760337] Aha,... 08-07-2017, 05:18 PM
  1. 07-31-2017, 04:04 PM #10
    gssixgun is offline
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    27,084
    Thanked: 13249
    Blog Entries
    1

    Default

    Trust me here they are not straight They are heel forward X strokes

    and if you are having a Frown problem you want to hone toward a smile,, There are two ways to do that I recommend the Swooping X stroke, basically hone the blade like it already has a smile and you will avoid the "Frowns"
    "No amount of money spent on a Stone can ever replace the value of the time it takes learning to use it properly"
    Very Respectfully - Glen

    Proprietor - GemStar Custom Razors Honing/Restores/Regrinds Website
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to gssixgun For This Useful Post:

    Mikali (08-07-2017)
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules