Results 1 to 10 of 15
Thread: Bevel re-set
Hybrid View
-
01-04-2011, 09:41 PM #1
inexpert response
Resetting has been needed for most of the blades I've gotten. 'Sometimes because the previous owner used some method I didn't know or couldn't reproduce, or because I wanted to smooth out some uneven bevel and spine wear. The goal being to have a bevel that I can take to the higher grit stones and hopefully not have to ever do a bevel set again.
One blade appeared to have zero hone wear. I marked the bevel w/ felt marker, took 2 strokes on an 8k stone and it was cleanly and completely removed. 6 more strokes and I was off to the 12k, then finisher. I don't see them like this often.
-
01-04-2011, 10:03 PM #2
I'm not sure what you were reading, but breadknifing a razor IS NOT a standard procedure for honing. It's only for razors with large chips or frowns; really, it's more restoranion than honing.
Different guys do their normal bevel setting in different ways. Personally, I don't use tape unless I have a lot of work to do.
-
01-04-2011, 10:48 PM #3
Exactamundo
Bevel restting is not necessary when touching up a razor that is in use.
And 3 layers of tape is not for a mini bevel it is just a quicker,easier way of establishing the edge on restores. Unless you're talking Tim Zowada's method which is a different kettle of fish again.Last edited by onimaru55; 01-04-2011 at 10:53 PM.
“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”
-
01-04-2011, 10:54 PM #4
As I have been learning to hone and getting better (arguably only slightly ), I have found that on some razors I had not initially set the bevel as well as I had thought. So for these, yes I reset the bevel (no breadknifing though - as already stated thats really only something you should need to do on a restoration, or maybe on something that someone has honed really really badly).
If the bevel isnt set well, the end sharpness of the razor will not be as good as it could be.
For other razors that I have honed recently, I just do a touch up when they need it. Havent had caused to reset bevel on razors in this state yet, but I am assuming at some point they will need it when touch ups no longer bring the razor to its expected state of sharpness.
-
01-05-2011, 01:15 AM #5
- Join Date
- Apr 2010
- Posts
- 11
Thanked: 1Sorry guys, should have never said the B. word. I am refering to this. If you go down to step 2 and 3. How does using three layers of tape at the begining make it easier to set a bevel on something that dull.
Why not one layer?
I agree NO BREADKNIFING
Honing a damaged blade - Straight Razor Place Wiki
-
01-05-2011, 01:16 AM #6
Just cause it's on the internet doesn't mean it's true or the only way to do something. You can use however many layers as you want. That's just the author's method. Personally, I use 1 layer for a lot of work; otherwise I use none.
-
01-05-2011, 02:27 AM #7
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 26,986
- Blog Entries
- 1
Thanked: 13234
This is a PERFECT example of taking the Wiki to the wrong place, that is a bastardization of two separate threads ...
Go to the bottom of the page read the original threads and you will find that Breadkinifing has no place in the Honers repertoire, it is a restoration technique...
Bevel setting should be done on any razor you are not absolutely sure of when you start honing that razor... now read above what Ron said, if you are sure of the edge then you are just touching up and no bevel set is needed
-
01-05-2011, 03:01 AM #8
The answer you seek is actually the first point in Step 2
"Use 3 layers of electrical tape on the spine. This concentrates the honing to the edge."
One layer will have you honing on a larger area therefore much slower on something like a wedge & only a little slower on a hollow.
Think of it as sawing lumber you don't cut on the largest area you can to speed things up.
Again this is a restoration thing & not for regular honing & touchupsLast edited by onimaru55; 01-05-2011 at 03:04 AM.
“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”
-
01-06-2011, 11:14 PM #9
The last guy who advocated bread-knifing around here as I recall we executed.
That word should only be invoked as the nuclear option when trying to save an otherwise "as toast" razor.No matter how many men you kill you can't kill your successor-Emperor Nero
-
01-06-2011, 11:23 PM #10
- Join Date
- Jan 2010
- Location
- Prosper, Texas
- Posts
- 14
Thanked: 7Ive restored a few and breadknifed only one time on a razor with a chip and smile going the wrong way.....its a nuclear option