Thread: EDC Knife

It's cool Mark. There isn't much I know but I am happy to share the little I can.
Number 11 is called an ulu and 12 is (in Italian) a mezza luna (which means half moon). I have a collection of mezza lunas.

Here is the complete list of blade profiles:


(1) A normal blade has a curving edge, and flat back. A dull back lets the wielder use fingers to concentrate force; it also makes the knife heavy and strong for its size. The curve concentrates force on a small point, making cutting easier. This knife can chop as well as pick and slice.
(2) A curved, trailing-point knife has a back edge that curves upward. This lets a lightweight knife have a larger curve on its edge. Such a knife is optimized for slicing or slashing. Trailing point blades provide a larger cutting area, or belly, and are common on skinning knives.

Clip-point blade


(3) A clip-point blade is like a normal blade with the back "clipped" or concavely formed to make the tip thinner and sharper. The back edge of the clip may have a false edge that could be sharpened to make a second edge. The sharp tip is useful as a pick, or for cutting in tight places. If the false edge is sharpened it increases the knife's effectiveness in piercing. The Bowie knife has a clipped blade and clip-points are quite common on pocket knives and other folding knives. It should be noted the clip illustrated is very pronounced, even exagerated. Clip point knives only need look as if a part of the knife from the spine to the point has literally been clipped off and this could be straight or curved.

Drop-point blade


(4) A drop point blade has a convex curve of the back towards the point. It handles much like the clip-point, though with a stronger point less suitable for piercing. Swiss army pocket knives often have drop-points on their larger blades.

Spear-point blade


(5) A spear-point blade is a symmetrically pointed blade with a point that is in line with the center line of the blade's long axis. Spear-points may be single-edged (without or with a false edge), may have only a portion of the second edge sharpened, or double-edged. Pen-knives are often single-edged, non-spined spear-points, usually quite small, named for their past use in sharpening quills for writing. Pen-knife may also nowadays refer to somewhat larger pocket knives which are often drop-points. Some throwing knives may have spear-points but without the spine, being only flat pieces of metal.
(6) A needle-point blade is a symmetrical, highly tapered, twin-edged blade often seen in fighting blades, such as the Fairbairn-Sykes commando knife. Its long, narrow point offers good penetration but is liable to breakage if abused. Although often referred to as a knife, this design may also be referred to as a stiletto or (slender variety of) dagger due to its use as a stabbing weapon albeit one very capable of slashing as well.
(7) A spay point blade (once used for spaying animals[citation needed]) has a single, mostly straight edge that curves strongly upwards at the end to meet a short, dull, straight clip from the dull back. With the curved end of the blade being closer to perpendicular to the blade's axis than other knives and lacking a point, making penetration unlikely, spay points can be suitable for skinning.
(8) A Kamasu Kissaki, often referred to as a "Americanized tanto" but actually a Japanese design tip which went out of use in the 15th century, has a somewhat chisel-like point that is thick towards the point (being close to the spine) and is thus quite strong. It is superficially similar to the points on most Japanese long and short swords (katana and wakizashi). The traditional Japanese tantō knife uses the blade geometry of (1). The Kamasu Kissaki is often straight but may also be gently curved. The point is actually a second edge on the end of the blade, with a total edge angle of 60 – 80 degrees. Some varieties may have the back edge angled to the point slightly and sharpened for a short distance from the point.
(9) A sheepsfoot knife has a straight edge and a straight dull back that curves towards the edge at the end. It gives the most control, because the dull back edge is made to be held by fingers. Sheepsfoot look like a sheep's hoof. They were used mostly by sailors in old times, as the shape of the tip prevented accidental penetration of the work or a person when the ship rolled suddenly.
(10) A Wharncliffe blade is similar in profile to a sheep's foot but the curve of the back edge starts closer to the handle and is more gradual. Its blade is much thicker than a knife of comparable size. [1]
(11 and 12) An ulu (Inuit woman's knife) knife is a sharpened segment of a circle. This blade type has no point, and has a handle in the middle. It is good for scraping, and sometimes chopping. It is the strongest knife shape. The semi-circular version appears elsewhere in the world and is called a head knife. It is used in leatherworking both to scrape down leather (reducing thickness), and to make precise, rolling cuts for shapes other than straight lines.

Update:

Here is what I EDC these days - one at a time that is.

Rat Cutlery Izula
BM Ritter Griptilian
Spyderco Endura - G10
Spyderco Manix 2
Bradley Alias II
Spyderco Tenacious (this is the cheapie I carry in NYC in case it's confiscated)

Jordan

Today was my CRKT 1* M16 Fire department red spear point, I love this knife.
Mine would be the one on top.( Obviously not my pic)

Hey, great thread.

This is my Fallkniven F1:


It's important to me it is not an agressive looking knife. It's a laminated blade with soft metal on the outside, hard metal on the inside. The handle is made of some sort of rubber and is a really nice fit

Greetings,
kevor.

I carry a Victorinox Cadet on my keys, a Leatherman Core on my hip, a Leatherman Micra in my manpurse and a Gerber Artifact as well when at work. I would also carry my Buck 110 if I went anywhere other than work or home.

I carry an "Old Timer" stockmans knife for the last 30 years, along with a belt watch

My current EDC is a LR Harner Necker. Great when I need to break down sysco orders...

Lately I've been carrying a Spyderco Cricket spyderedged. Small but does the job.

I carry either a beaten Buck Summit (or what's left of it) or a SOG Vulcan.

I carry an Opinel No. 7 very simple but VERY sharp!