Thread: Cloning celluloid scales: a work in progress

The set I poured this morning is gonna work. Though I botched two pair by being impatient. No problem. I wasn’t fully happy with the color match, so I made two more pair.

In the process of all this... I ended up with excess resin. And now I have a free standing urine sample paper weight.

Oh boy! Andrew could glue that to something and make a swell brush!

Originally Posted by Voidmonster

In the process of all this... I ended up with excess resin. And now I have a free standing urine sample paper weight.

Perfect gift for any medical professional.

I'm thinking this might make for a very good prank...

HAR! I can see it!

Oh yeaaah!

This is looking good, now!

They still need more time to cure, but it’s pretty obvious these are going to work. It’ll just be a question of flex/brittleness at full cure.



Originals in the middle, third batch is next and the ones on the outside are fourth batch with a different dye mix.

I should be able to either sand or fill in the scratches around the pin holes. I never got any wax to make a fully clean mold... maaaaybe I should. But I don’t see myself making a whole lot of these scales. As far as I know, I only need three pair. One for Joshua, one for Tom and one for me.

Very impressive, Zak!
My little blade and myself appreciate the inclusion.
I suppose I should now send you a little Maw, Son, and Son small surgical razor I have intended to send you for years!

Originally Posted by sharptonn

Very impressive, Zak!
My little blade and myself appreciate the inclusion.
I suppose I should now send you a little Maw, Son, and Son small surgical razor I have intended to send you for years!

Oooh! Is it one of the ones in German silver scales with the crowsfoot mark on the tang?

German silver scales...I shall look for the crowsfoot as I get back to the shop!