Thread: Need advice on pinning new scales

I asked a separate question in this forum on the use of inner washers. This is a different question, but still related. Can you provide advice (or direct me to a good video) on how to pin the razor and scales. I see there are many different approaches to the pinning process. I have new horn scales with wedge already in place...and pin holes drilled. Any advice welcomed.

I think GSSixgun has a video plus I think in our library we have lots of info on pinning. Sharptonn always makes beautiful peens. It just takes practice. Look in the library for now until someone pops in with detailed info.

I always pin non pivot pin first. Second I place outside washer on rod and put it through pivot hole. Place inside washer on rod then razor another inside washer. Push pin through pivot hole in other scale and put on outside washer. Cut pin so you have about 1/32" on each outside washer.

Originally Posted by bouschie

I always pin non pivot pin first. Second I place outside washer on rod and put it through pivot hole. Place inside washer on rod then razor another inside washer. Push pin through pivot hole in other scale and put on outside washer. Cut pin so you have about 1/32" on each outside washer.

What size washers do you use (inside and out)?

In your other thread I gave inside was her size. Outside I think is 1/16 I.D. x 1/8 O.D.

Look on micro-fasteners.com

https://www.youtube.com/watch?v=mmwvf8xLKmk&t=406s

Keep in mind like I mentioned on your other thread washers have two sides the flat side always goes toward the Scales inside and outside...

There are a few other vids on my channel with pinning tricks

Washers and collars
https://www.ebay.com/sch/ajkenne4xm3...1&_ipg=&_from=
https://www.ebay.com/itm/173443435586
This is two common shopping spots for me. There are others but this will get you what you need at a great price.