Thread: Nagura Honing - Video tutorial

Originally Posted by mainaman

the grit from the nagura is sandwiched between the bevel and the base stone. When you hone the grit will abrade the metal , while in the mean time it will also break down to finer size by the pressure. The base stone needs to be harder than the nagura so that it does not release it's own slurry in the honing mix.

Thanks for the explanation Stefan and for the video presentation. I didn't realize that nagura use differed from using slurry stones of the same composition as the base stone or a diamond plate to generate abrasive from the base stone. Now I begin to understand the attraction to using the honorable nagura on venerable Nakayama ....or whatever.

Question:

I don't think you mentioned it in the video, but would you use the Koma nagura as part of the progression after Mejiro and before tomonagura OR would you use it in place of Mejiro?

Originally Posted by Fbones24

Question:

I don't think you mentioned it in the video, but would you use the Koma nagura as part of the progression after Mejiro and before tomonagura OR would you use it in place of Mejiro?

Koma certainly can be used, whether after Mejiro or instead depends on personal preference just try and see what you like best.

Thanks for sharing Stefan! Greatly appreciated.

Hi,

Would you use chrom ox, or diamond spray, or similar after the passes on water (as it seems like you did after the tomonagura, but I could be mistaken), or is it shave ready as it is?



Thanks,

Originally Posted by pelicano

Hi,

Would you use chrom ox, or diamond spray, or similar after the passes on water (as it seems like you did after the tomonagura, but I could be mistaken), or is it shave ready as it is?



Thanks,

After the tomonagura I went to water finish only.

Great job , now I have another reason (and no more excuses) to try out the three nagura I got from Maksim with my Oozuko.

Do you think Atoma plates could fit in the progression either after the Tomonagura or perhaps even instead of it??

Originally Posted by Muscles

Great job , now I have another reason (and no more excuses) to try out the three nagura I got from Maksim with my Oozuko.

Do you think Atoma plates could fit in the progression either after the Tomonagura or perhaps even instead of it??

Atoma is not good for honing razors, I personally use mine only for lapping.

Originally Posted by mainaman

Atoma is not good for honing razors, I personally use mine only for lapping.

I think he meant for raising slurry, not honing directly on the Atoma. Do you have any experience with using the Atoma to raise slurry?

Originally Posted by heirkb

I think he meant for raising slurry, not honing directly on the Atoma. Do you have any experience with using the Atoma to raise slurry?

I used to use it a lot but recently I've been using tomonaguras exclusively.