Results 1 to 10 of 685
687Likes
LinkBack URL
About LinkBacks-
08-18-2012, 02:36 PM #1Senior Member
- Join Date
- Feb 2008
- Posts
- 32,564
Thanked: 11042
Announcing The SRP Logo Limited Edition Straight Razor
Announcing The SRP Logo Limited Edition Straight Razor
Ladies and Gentlemen, this is the prototype of the SRP Logo LE razor. It was made from a stencil custom razor maker, SRP member (PapaBull), Robert Williams did of the logo at the top of our page and is on the money. I should have it in hand early next week if not later today. It is a 6/8 with G-10 scales. As you can see the SRP logo is etched in the belly of the blade and Robert's trademark is on the tang mark side with the XII (year) etched on the reverse along with each razors individual # engraved by hand.
It is a limited edition of no more than 200 individually numbered razors. No more than 200 but possibly less than that depending on demand. All of the work is done by RW alone from hammer forging his 01 steel hand cut blank to final heat treat and polishing/honing. It is a one man operation from beginning to end. Because it is a one man operation the razors will become available as Robert receives orders and finishes them. So there will be between 3 and 5 per week as he fills orders.
The razor is priced, @ $350 + $10 shipping in the CONUS, substantially lower than RW ordinarily charges for one of his customs.
FYI Robert is honing each of these razors with one layer of electrical tape.
Payment will be by paypal direct to RW and is not required, or desired, until the razor is ready to ship.
TO ORDER SEND A PM to PapaBull
Include the following information ;
Your SRP screen name
Your Name
Your Address
Your Phone number
Use The Link Below ;
http://straightrazorpalace.com/priva...do=newpm&u=624
Last edited by JimmyHAD; 08-20-2012 at 07:16 PM.
-
The Following 63 Users Say Thank You to JimmyHAD For This Useful Post:
1oldDago (10-13-2016), 44Whiskas (08-25-2012), 94Terp (08-24-2012), AlanII (08-20-2012), Andy77 (01-05-2015), artp47 (04-29-2015), bamabubba (04-22-2013), BanjoTom (08-21-2012), ben07 (09-07-2012), Bruce (08-21-2012), ChopperDave (05-20-2015), ColonelG (10-08-2013), Coots (02-11-2016), Darcsyde (07-22-2013), DFriedl (08-20-2012), donv (08-24-2012), Double0757 (08-21-2012), easyace (08-21-2012), eTom (08-21-2012), Grizzley1 (10-06-2012), Havachat45 (08-20-2012), hothotpot (11-06-2012), jaswarb (08-20-2012), jkatzman (06-16-2015), jmercer (02-20-2015), JohnnyCakeDC (08-21-2012), lotse (06-29-2013), Lynn (08-20-2012), lz6 (08-18-2012), MajesticShaver (10-10-2016), Maxi (08-18-2012), MickR (08-21-2012), Moosiker (09-10-2012), Morty (08-22-2012), Mvcrash (08-20-2012), mw22 (01-21-2014), Neils1304 (05-12-2015), nipper (08-20-2012), parkerskouson (08-21-2012), randydance062449 (08-20-2012), ratbag (11-28-2012), robbiebelling (11-08-2017), roughkype (08-18-2012), ScottGoodman (08-20-2012), shammer (08-20-2012), sharp (09-04-2012), sharpy (02-13-2013), sigit666 (09-15-2012), Siguy (02-21-2014), SirStropalot (08-20-2012), sixsixty (09-13-2012), SmokeyRazor (03-03-2015), spbosch (12-12-2014), Steelystan (06-14-2013), str8razor (09-16-2012), StraightRazorRobot (09-27-2012), Theo168 (07-19-2013), turando72 (08-21-2012), unit (08-21-2012), yacht (12-15-2012), Yochatman (09-10-2012), Zephyr (08-20-2012), Zuffa (06-10-2013)
-
08-20-2012, 04:19 PM #2Senior Member
- Join Date
- Feb 2010
- Location
- California
- Posts
- 4,833
Thanked: 1841
What a beautiful job on this razor. Completely captures the spirit of SRP and our Logo straight. Thanks Jimmy for all your work and thanks to the others who helped move this along. And a special thanks to Robert Williams who is gracious enough to undertake the real work to be done here. SRP can be most proud that a master craftsman like Robert Williams will be producing the SRP straight razors. These are collectible on many levels. Thanks Robert!
Bob
"God is a Havana smoker. I have seen his gray clouds" Gainsburg
-
08-20-2012, 04:22 PM #3Senior Member
- Join Date
- May 2011
- Location
- The Woodlands, Tx
- Posts
- 1,912
Thanked: 214
that is beautiful!!!!
PM sent!lz6 likes this."We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm."
-
08-20-2012, 04:27 PM #4Señor Member (the name is Dave)
- Join Date
- Feb 2012
- Location
- Sarver, Pennsylvania, United States
- Posts
- 683
Thanked: 88
Mine's ordered. Thanks to everyone involved!
lz6 likes this.
-
08-20-2012, 05:12 PM #5'tis but a scratch!
- Join Date
- Oct 2010
- Location
- Durango, Colorado
- Posts
- 2,080
- Blog Entries
- 2
Thanked: 443
Mine's ordered, too. Thanks also to MichaelC, who designed the logo. I keep admiring the parallel curves of the spine and the scales. It's as good-looking closed as it is open.
Last edited by roughkype; 08-20-2012 at 05:45 PM.
"These aren't the droids you're looking for." "These aren't the droids we're looking for." "He can go about his business." "You can go about your business."
-
The Following User Says Thank You to roughkype For This Useful Post:
MichaelC (08-21-2012)
-
08-20-2012, 05:13 PM #6Predictably Unpredictiable
- Join Date
- Jan 2010
- Location
- Northern NJ
- Posts
- 3,588
Thanked: 1487
Wow...looks great...I'm in!!!
lz6 likes this.“Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.”
Albert Einstein
-
08-20-2012, 05:22 PM #7Senior Member
- Join Date
- Apr 2012
- Location
- Hoboken, NJ
- Posts
- 124
Thanked: 20
Wow, great job Robert! The logo in real life - neat stuff!!!
lz6 likes this.
-
08-20-2012, 05:34 PM #8Not with my razor 🚫
- Join Date
- Oct 2011
- Posts
- 1,859
Thanked: 568
Thanks Jimmy, Robert, and all those that have contributed to this effort in the background, THANKS!!!
Mine is ordered also!! Exceeded my expectations, WOW!!!!
Best Regards,
Howardlz6 likes this.
-
08-20-2012, 08:45 PM #9lobeless
- Join Date
- Feb 2012
- Location
- Kansas
- Posts
- 4,864
Thanked: 762
That is a great looking razor! Wow!
David
-
08-20-2012, 09:15 PM #10Razor Vulture
- Join Date
- Oct 2010
- Location
- Lone Star State
- Posts
- 26,086
Thanked: 8612
Nice! And by a member such as Robert! Awesome!
Reply With Quote
