Damn, it's got a roll bead on the top. Not sure the sanding idea would work unless you could somehow put a finished edge on the top of that thing once it was sanded.
Attachment 268999
Printable View
Damn, it's got a roll bead on the top. Not sure the sanding idea would work unless you could somehow put a finished edge on the top of that thing once it was sanded.
Attachment 268999
You should do it just to show us you can.
Should I call you out??? Bet you can't do it...
I think you can... :)
Ya possibly. Or drilled it. takes longer but is effective.Quote:
I am thinking that if I used smaller grabs with the vice and rotated it more i would have had better luck.
I can TIG weld, not too good, but I can do it
Oh and that brush is only worth $499.95 so don't bother welding it :D
Attachment 269000
Here's to 1000 pages of projects and shared knowledge! :beer1:
The odometer is about to roll over on this thread. Coming up on 10,000 posts.
EDIT; I think that xiaotuzi and I noticed this in the same instant.
Tom, my hats off to you on the Prius.
Nice...
Pete <:-}
What a busy day on this thread and I have been doing planes trains and automobiles all day. Some nice work going on.
P.S.
Tim weld the damn thing already!
If I can borrow your welder I can show you.
This was at least 30 years ago but the guy that taught me showed me that you want to get the pedal set to 99.99 percent of what will burn trough and then go from there.
What is 99.99 percent of this ferrule?:shrug:
Probably burn up about 10 of them to figure it out.