What are you working on?

Quote:

---

Originally Posted by MW76

Today, as part of a continued effort to get that buttery edge, i took some tutelage from a one Mr. Sharptonn, and built some balsa paddle strops.

Tom i varied slightly from your instructions based on what i could find. Thanks again for the help.

Quick run down..

Cut 20" long pieces of 3.5" x .75" walnut board, and 8 small blocks from the same. The balsa is 3/16 thick and 18" x 3".
Attachment 235234

Pre drilling mock up.
Attachment 235235

I countersunk holes and used t-pins on the bottom. I glued the bottom blocks on then used one wood screw to hold them in place.
Attachment 235236

T-pins. I used a peening hammer to adjust the angle so the bolts went in straight from the other side.
Attachment 235237

Top view.
Attachment 235238

#10 machine screws. Today on the way back to Home Depot i learned there is a difference between and #10-24 and a #10-32 bolt.
Attachment 235239

Heres both of them all done. I hit the walnut with some Howards Feed & Wax and Minwax. I couldn't help myself.
Attachment 235240

Now i just have to wait for the fancy honing powders i ordered to arrive from across the seas. Delivery estimate was May 5th.. ugh.

Time for a shave, then a beer.

Thanks for looking guys.

---

Looks SUPER, Matt! :tu

Quote:

---

Originally Posted by sharptonn

Looks SUPER, Matt! :tu

---

Thanks Tom!! And double thanks again for the help.

http://uploads.tapatalk-cdn.com/2016...46a068ad1f.jpg

Now I'm out here feedin the chipmunks. Ive made friends with the den behind my apt. That's Fred at the 'feeding rock'.

Quote:

---

Originally Posted by HARRYWALLY

Just a cool pic of some blades I need to work on.

Attachment 235200

---

Bring some of those to the meet. I have no project or dull blades. And I dont feel like fishing the bay. I will be your bevel setter boy on the Chosera 1K.

Scale maker...is what he's lookin for . how about a pin man..[emoji6]

Okiee dokiee Jonathan. There's a Boker King Cutter in there with your name on it. There's 2 there that are in great condition. Almost exactly the same, but there's also a third that's larger in every direction.... can't have that one. :) I'm going to try and have a bunch of razors that just need honing. I have 2 so far ready, and hoping to have 2 more ready as well.

Quote:

---

Originally Posted by HARRYWALLY

Okiee dokiee Jonathan. There's a Boker King Cutter in there with your name on it. There's 2 there that are in great condition. Almost exactly the same, but there's also a third that's larger in every direction.... can't have that one. :) I'm going to try and have a bunch of razors that just need honing. I have 2 so far ready, and hoping to have 2 more ready as well.

---

"DAMMIT"!!!!! Wished I had the time to make that meet. Would love ta meet a bunch of you guys. Only 5-7 hour drive too. [emoji20]

Quote:

---

Originally Posted by outback

"DAMMIT"!!!!! Wished I had the time to make that meet. Would love ta meet a bunch of you guys. Only 5-7 hour drive too. [emoji20]

---

I can't remember what the drive is for me, but I'm thinking 5-6 for me.

Just come Mike. I got a desert ironwood brush handle you can have. :)

Just did google maps. Maggards is closer than I thought. Only 4h 2min. Man that's not even that bad!

Quote:

---

Originally Posted by outback

Scale maker...is what he's lookin for . how about a pin man..[emoji6]

---

Ya know Mike, If we reach out to Tom for some scales. And I have enough rod and washers sitting around.
We could go all assembly line and knock out a few.
Plus we have Maggards shop and store. He has all the rod, washers and that ...How do you say the tool to make doomed washers?
Man we could use you as a pin man into scales.