862Likes
Threaded View

WW243 I Found It Over There 02-12-2014,
04:59 PM

thebigspendur As a veteran of many Geology... 02-12-2014,
05:38 PM

Vasilis Finding stones is not... 02-12-2014,
05:45 PM

DennisBarberShop I can get ya some just let me... 02-19-2014,
08:34 PM

DennisBarberShop If it turns out good ill send... 02-19-2014,
08:39 PM

DennisBarberShop Works for me 02-19-2014,
10:07 PM

DennisBarberShop Oddly enough looks like it... 02-19-2014,
11:02 PM

DennisBarberShop Cool ill get pics up after I... 02-20-2014,
01:52 AM

DennisBarberShop First time at this....what I... 02-20-2014,
02:54 AM

DennisBarberShop The stuff I sand off is... 02-20-2014,
03:06 AM

DennisBarberShop Cheap $50 tile saw from Lowes... 02-20-2014,
03:16 AM

DennisBarberShop There's a shot of it 02-20-2014,
03:27 AM

DennisBarberShop Finished the hone....feels... 02-20-2014,
03:39 AM

DennisBarberShop Loupe and razors are at the... 02-20-2014,
03:49 AM

DennisBarberShop I take that back....brought... 02-20-2014,
03:53 AM

DennisBarberShop Ummm...huge improvement with... 02-20-2014,
04:13 AM

DennisBarberShop Soon to be your stone Rez~
... 02-20-2014,
04:57 AM

DennisBarberShop Or not...had a lot of... 02-20-2014,
05:48 AM

DennisBarberShop My friend had about 20 of em... 02-20-2014,
05:59 AM

DennisBarberShop Oh and on the bright side,... 02-20-2014,
06:01 AM

DennisBarberShop This stuff is very soft, and... 02-20-2014,
06:11 AM

DennisBarberShop 156859
My new Kentucky... 02-20-2014,
07:40 PM

DennisBarberShop Im pleased....first ive ever... 02-20-2014,
08:02 PM

DennisBarberShop My friend brought me a... 02-20-2014,
11:41 PM

DennisBarberShop I just like that my stone is... 02-20-2014,
11:57 PM

DennisBarberShop We are trying to create a new... 02-21-2014,
03:40 AM

DennisBarberShop Well...there's an entire gas... 02-21-2014,
04:54 AM

DennisBarberShop Should be able to make a... 02-21-2014,
05:22 AM

DennisBarberShop I'm... 02-21-2014,
05:37 AM

DennisBarberShop I'd like to find out what the... 02-21-2014,
05:40 AM

DennisBarberShop Just an amazingly smooth... 02-21-2014,
05:46 AM

DennisBarberShop Good idea, might use it on a... 02-21-2014,
02:53 PM

DennisBarberShop I figured it was a very fine... 02-23-2014,
07:07 PM

DennisBarberShop Let me know how it works and... 02-23-2014,
08:00 PM

DennisBarberShop Nice, I need to go scavenging... 02-24-2014,
01:21 AM

DennisBarberShop Dunno but that one I made the... 02-24-2014,
01:38 AM

DennisBarberShop Lol, easy on pulling out... 02-24-2014,
03:40 AM

DennisBarberShop Or stop by road cutouts and... 02-24-2014,
04:22 AM

DennisBarberShop Looks good, keep me in mind... 02-27-2014,
02:13 PM

DennisBarberShop I call dibs lol, hows the... 02-27-2014,
07:57 PM

DennisBarberShop The back of my jeep is... 03-01-2014,
11:40 PM

DennisBarberShop Looking good!
Harbor... 03-02-2014,
03:45 PM

DennisBarberShop Snowed in so braved the walk... 03-03-2014,
06:09 PM

DennisBarberShop Wish me luck these are the... 03-03-2014,
06:15 PM

DennisBarberShop That saw is sweet! 03-25-2014,
10:35 PM

DennisBarberShop We have good rocks too! Kinda 03-25-2014,
11:37 PM

DennisBarberShop Haha, winter sucks! But... 03-25-2014,
11:52 PM

DennisBarberShop It arrived Rez....sadly it... 03-26-2014,
01:19 PM

DennisBarberShop Forgot it at work, ill have... 03-27-2014,
12:28 AM

DennisBarberShop Ive found with slate that it... 03-28-2014,
01:11 PM

DennisBarberShop Finally got a chance to lap... 04-02-2014,
03:00 AM

DennisBarberShop Its lighter than the pictures... 04-02-2014,
03:18 AM

DennisBarberShop Will do, ill let ya know... 04-02-2014,
03:58 AM

DennisBarberShop Gonna try and get one of... 04-17-2014,
06:43 PM

DennisBarberShop Wet with slurry
163351
Wet... 04-17-2014,
07:01 PM

DennisBarberShop Yeah, its a good finishing... 04-17-2014,
07:07 PM

DennisBarberShop I love making my own hones,... 04-17-2014,
07:10 PM

doorsch Iam trying to look out for... 04-17-2014,
08:09 PM

DennisBarberShop Thats what I hate about the... 04-17-2014,
09:25 PM

DennisBarberShop Looks like some quality... 04-17-2014,
11:19 PM

doorsch Shaun are these the ones... 04-18-2014,
01:19 AM

doorsch Yeah Shaun that was the... 04-18-2014,
01:37 AM

DennisBarberShop Ok, that's it, im jealous... 04-18-2014,
01:41 PM

DennisBarberShop What good ways to work stone... 04-18-2014,
02:25 PM

DennisBarberShop How well would a masonry... 04-18-2014,
02:36 PM

DennisBarberShop Didnt know if it needs to be... 04-18-2014,
02:43 PM

DennisBarberShop Or would it be HCAD? (hone... 04-18-2014,
02:45 PM

DennisBarberShop 1k for a wet sander is out of... 04-18-2014,
03:28 PM

DennisBarberShop Thats where I stand, I want... 04-18-2014,
04:10 PM

DennisBarberShop True there, might be a good... 04-18-2014,
04:25 PM

DennisBarberShop Ok cool, its how ive been... 04-18-2014,
09:34 PM

doorsch They look nice...did the... 04-19-2014,
03:44 PM

DennisBarberShop If they work good I call dibs... 04-19-2014,
05:20 PM

DennisBarberShop Hillbillypick came by my... 04-20-2014,
07:30 AM

DennisBarberShop I think the problem lies... 04-20-2014,
02:44 PM

DennisBarberShop Taken from: ... 04-20-2014,
03:01 PM

DennisBarberShop No biggie, interesting stuff... 04-20-2014,
03:34 PM

doorsch I Found It Over There 04-28-2014,
07:43 PM

DennisBarberShop All the sandstone I ever find... 04-29-2014,
06:47 PM

DennisBarberShop Finally back to working on my... 04-30-2014,
03:08 AM

DennisBarberShop Honestly may be finer than... 04-30-2014,
03:13 AM

DennisBarberShop This one has some cracking on... 04-30-2014,
03:35 AM

DennisBarberShop Heres whats left of it,... 04-30-2014,
04:39 AM

DennisBarberShop The brown is clay dirt on it 04-30-2014,
04:40 AM

DennisBarberShop A customer of mine snagged... 04-30-2014,
02:05 PM

DennisBarberShop Lol...ive got some spots... 04-30-2014,
02:30 PM

DennisBarberShop Saw some green layers I want... 04-30-2014,
02:31 PM

DennisBarberShop Good shot of what I'm working... 05-06-2014,
11:24 PM

DennisBarberShop LOL....hard enough that... 05-06-2014,
11:28 PM

DennisBarberShop Time to lap...
165178 05-07-2014,
12:18 AM

DennisBarberShop These are handy for initial... 05-07-2014,
12:25 AM

DennisBarberShop The longest stone was 11... 05-07-2014,
01:16 AM

DennisBarberShop Wet
165189
Dry
165190... 05-07-2014,
01:41 AM

DennisBarberShop I need to run by the pawn... 05-10-2014,
03:34 PM

DennisBarberShop I'd like to make a 12 inch... 05-11-2014,
03:22 PM

DennisBarberShop I figured as quick as it goes... 05-11-2014,
03:41 PM

DennisBarberShop Yeah either way, id pass on... 05-11-2014,
04:37 PM

DennisBarberShop Long shaft and or a belt... 05-11-2014,
04:39 PM

DennisBarberShop That hack saw style power... 05-12-2014,
12:23 AM

DennisBarberShop Im curious, could the hacksaw... 05-12-2014,
12:25 AM

DennisBarberShop Hmmm...someone make me some... 05-12-2014,
02:28 AM

DennisBarberShop I dont plan on making hones... 05-12-2014,
02:57 AM

doorsch Wasnt it possible to do a... 05-14-2014,
12:41 PM

DennisBarberShop Just finished up this big... 06-11-2014,
01:36 PM

DennisBarberShop Made a stop and grabbed some... 06-27-2014,
01:32 PM

DennisBarberShop There are spots like this... 06-27-2014,
02:28 PM

DennisBarberShop No clue honestly, not really... 06-27-2014,
03:28 PM

DennisBarberShop Lots of quarries here, but... 06-28-2014,
03:28 AM

DennisBarberShop Hadnt thought about modifying... 06-30-2014,
11:12 PM

DennisBarberShop Looks fantastic iceni 07-03-2014,
12:02 PM

DennisBarberShop Split it in two with a tile... 07-14-2014,
01:55 PM

doorsch Could be so, i thrust your... 07-20-2014,
02:10 AM

DennisBarberShop Oops on the double pic....its... 07-23-2014,
10:29 PM

DennisBarberShop Also seems a bit harder than... 07-23-2014,
10:40 PM

DennisBarberShop Im gonna take it to the tile... 07-23-2014,
11:42 PM

DennisBarberShop Posting pics as I go. Cross... 07-24-2014,
12:32 AM

DennisBarberShop freshly slabbed...covered in... 07-24-2014,
12:50 AM

DennisBarberShop Here's the best way to lap by... 07-24-2014,
01:16 AM

DennisBarberShop Other was taking too... 07-24-2014,
02:01 AM

DennisBarberShop Test run stone.
173914 07-24-2014,
02:02 AM

DennisBarberShop Saturday after work im... 07-24-2014,
02:29 AM

DennisBarberShop I really love the colors on... 07-24-2014,
02:31 AM

DennisBarberShop If someone can draw me... 07-24-2014,
02:32 AM

DennisBarberShop A 3 inch cut depth is what I... 07-24-2014,
02:55 AM

DennisBarberShop True on the rentals, I just... 07-24-2014,
02:59 AM

DennisBarberShop Finished it....trial run in... 07-24-2014,
09:17 PM

DennisBarberShop Well, initial test, test... 07-24-2014,
10:53 PM

DennisBarberShop 5 15/16"x 1 5/8" x 9/16"
... 07-25-2014,
11:14 AM

DennisBarberShop Based on the color... 07-25-2014,
11:34 AM

DennisBarberShop Ive got 10 spots I can stop... 07-25-2014,
05:22 PM

DennisBarberShop Well....I'm good to go on dmt... 07-26-2014,
03:10 AM

DennisBarberShop Well...another one finished.... 07-26-2014,
04:32 AM

DennisBarberShop Made a stop and grabbed a... 07-27-2014,
05:03 AM

DennisBarberShop May be the easiest stone ever... 07-28-2014,
12:46 AM

DennisBarberShop Nope no illusions... 07-28-2014,
01:28 AM

DennisBarberShop Almost there...
Couple low... 07-28-2014,
01:49 AM

DennisBarberShop Pretty sure I can knock 1 out... 07-28-2014,
01:50 AM

DennisBarberShop Now that I have some daylight... 07-28-2014,
02:07 PM

DennisBarberShop Dang....looks promising...I... 09-30-2014,
01:51 AM

rickboone 181878
Recently got this... 10-14-2014,
05:06 PM

Blistersteel i need to find about 8... 10-14-2014,
09:00 PM

DennisBarberShop Yep, black was my first hone... 10-14-2014,
11:47 PM

rickboone I am beyond honored.
Need... 10-14-2014,
11:48 PM

DennisBarberShop I still think its cool how... 10-14-2014,
11:49 PM

Ranzor Wow that sucks about the... 12-06-2014,
03:14 AM

yotebuster1200 My brother in law is a... 10-12-2015,
09:18 PM

yotebuster1200 I will have to reread this... 10-12-2015,
11:24 PM

yotebuster1200 Just need a welder some... 10-13-2015,
02:55 AM

aaron1234 I found this in Arkansas, it... 10-13-2015,
03:11 AM

aaron1234 Does anyone have any... 04-04-2016,
11:26 PM

RezDog On soft rock a wet belt... 12-11-2018,
09:00 PM

Philipp78 Shale/slate are quite common... 08-23-2020,
04:51 AM
-
Senior Member
-
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules