View Poll Results: What's in your pocket today?

Voters
665. You may not vote on this poll

  • A multi-tool (Leatherman, etc.)

    61 9.17%

  • A traditional multiblade (Swiss Army, etc.)

    87 13.08%

  • A traditional single blade (Buck, etc.)

    157 23.61%

  • A tactical folder or fixed blade (Strider, etc.)

    235 35.34%

  • More than one of the above.

    125 18.80%
Results 1 to 10 of 1183
Like Tree1545Likes

Thread: EDC Knife

Threaded View

jockeys EDC Knife 04-17-2008, 02:47 PM
jockeys in my pocket today I have a... 04-17-2008, 02:51 PM
jnich67 Since I live in NY, I tried... 04-17-2008, 02:53 PM
JMS I notice you don't cover... 04-17-2008, 03:09 PM
jockeys um, one of the choices is... 04-17-2008, 03:15 PM
Bruno I always carry at Spyderco... 04-17-2008, 03:20 PM
jockeys clarification added to first... 04-17-2008, 03:26 PM
JMS I guess I am a bit of a snob... 04-17-2008, 06:31 PM
ktkeith Same problem: I'm in NYC too,... 12-26-2009, 06:18 PM
clrobert60 I'd be lost without my Buck... 04-17-2008, 03:08 PM
Lunumbra I have a large collection. I... 04-18-2008, 10:01 AM
jnich67 I was just looking at the... 04-18-2008, 04:03 PM
SithWithNoName My everyday carry knives are:... 04-27-2008, 09:17 PM
mmccrary My usual EDC knife is a... 04-28-2008, 12:03 AM
paulo black Spyderco Calypso Jr in... 04-30-2008, 12:55 PM
cybrok Wich model is it? 08-31-2008, 11:25 PM
Hutch My usual EDC's are . ... 09-02-2008, 02:04 AM
davidcarr3 Buck Gent Framelock Ti 05-03-2008, 02:26 PM
Philadelph Here are a couple I carry... 08-31-2008, 09:45 PM
JohnP That's actually a good... 08-31-2008, 11:06 PM
iron maiden Normally I carry a Benchmade... 09-02-2008, 04:53 AM
jnich67 I just got a Benchmade... 09-02-2008, 02:00 PM
ByronTodd My current pocket empty (of... 09-02-2008, 06:37 PM
redtruck That fixed blade in the... 11-09-2014, 04:25 AM
McKie I've had the small Swiiss... 09-02-2008, 06:38 PM
jockeys today in my pocket it's a... 09-02-2008, 06:47 PM
rastewart Well ... after reading some... 09-02-2008, 07:35 PM
heelerau Gents, for the last 30 years... 09-02-2008, 09:42 PM
fccexpert I used to carry a Gerber Fast... 09-04-2008, 07:21 PM
icedog I carry a Benchmade Osborne... 09-05-2008, 10:34 AM
bjorn Currently carrying a Spyderco... 09-05-2008, 11:09 AM
Ditch Doc A word of advice. Last night,... 09-05-2008, 11:57 AM
kelbro My EDC most of the time is a... 09-05-2008, 12:32 PM
jnich67 Good point! :rolleyes: ... 09-05-2008, 03:52 PM
crushnbugs On a daily basis I carry two... 08-01-2009, 07:19 PM
PhatMan Hi, In the UK we have to be... 08-02-2009, 08:20 AM
ndw76 I have a cheap Pacific... 08-02-2009, 09:41 AM
DasBoot Bench Made 950 Rift. 08-03-2009, 09:53 PM
matt321 I have a bunch of Spyderco... 08-10-2009, 04:53 AM
WongKonPow I had to put more than one of... 08-10-2009, 03:58 PM
gregs656 I have a small number of... 08-10-2009, 04:08 PM
JokiJo I carry a leatherman knife,... 08-11-2009, 07:55 PM
icedog It looks like I will be... 08-11-2009, 09:55 PM
DwarvenChef My current EDC is a LR Harner... 08-26-2009, 12:44 AM
Mykl Lately I've been carrying a... 08-30-2009, 11:24 AM
sparq I carry either a beaten Buck... 09-23-2009, 09:39 PM
livingontheedge I carry an Opinel No. 7 very... 09-23-2009, 09:53 PM
kicker245 I also carry a spyderco... 09-25-2009, 12:12 AM
tabre Ontario RAT Model 1, baby!... 11-19-2009, 01:11 AM
srkilpatrick I'd be lost without my... 12-09-2009, 02:23 AM
hitman I have a gerber suspention... 12-09-2009, 08:39 AM
matisso Mine is Byrd Crow - an econo... 12-09-2009, 09:21 AM
icedog I can't find my EDC for two... 12-10-2009, 06:23 AM
GadgetGeek so far in Auz my EDC blades... 12-21-2009, 04:24 AM
niftyshaving None of the above... How... 01-15-2010, 03:19 AM
chip I suspect that many on this... 02-21-2010, 06:58 PM
Ulrich Pocket: Spyderco D'Allara -... 02-21-2010, 07:05 PM
gregs656 I recently invested in a key... 02-21-2010, 08:19 PM
Spartigus My keyring tool is a... 02-24-2010, 12:30 AM
Spartigus New EDC Knife 03-11-2010, 10:35 AM
GadgetGeek Can't go wrong with the... 03-12-2010, 01:04 AM
Blue Kershaw Leek here. ... 03-12-2010, 01:10 AM
LX_Emergency Custom combo from Thailand... 03-15-2010, 08:31 AM
Crotalus I'm also a Kershaw fan. I... 02-10-2012, 06:57 PM
Slacker007 EDC Knives 07-02-2010, 08:47 PM
jnich67 Just an update :rolleyes: ... 07-22-2010, 04:02 PM
jnich67 Ignore my last post. Here is... 07-28-2010, 12:36 AM
jnich67 ...and the straight-point... 07-28-2010, 12:39 AM
basil Living in a big city I think... 07-30-2010, 05:56 AM
Zjgilbert Your EDC Knife? 01-02-2012, 09:10 PM
Theseus I've carried a basic... 01-02-2012, 09:14 PM
richmondesi I carry a Kershaw Leek or... 01-02-2012, 09:23 PM
Zjgilbert My dad carried a Kershaw... 01-02-2012, 09:41 PM
EisenFaust Knives are a big no no here... 01-05-2012, 05:08 AM
sidmind http://img.photobucket.com/alb... 01-05-2012, 05:17 AM
ChesterCopperpot I also carry a Kershaw, but... 01-06-2012, 05:30 AM
MickR You can have a silenced... 01-05-2012, 09:31 AM
Straightrazzin SOG Knives 02-09-2012, 09:40 PM
Slartibartfast I had a SOG Flash II that I... 02-09-2012, 10:23 PM
ZeroCool Pocket Knives... 05-02-2012, 04:57 PM
JimmyHAD I've been carrying a Case XX... 05-02-2012, 05:02 PM
Hirlau This is my EDC, I carry it in... 05-02-2012, 10:35 PM
poppy926 For many, many years now it... 05-02-2012, 11:00 PM
ZeroCool Hirlau, That's a rough day... 05-03-2012, 01:14 AM
LX_Emergency If it's the traditional route... 05-04-2012, 07:10 AM
Bruno Those knives are all nice,... 05-04-2012, 08:46 AM
Crotalus You only need one hand for... 05-04-2012, 02:24 PM
xuz Recently, I find the sebenza... 05-04-2012, 02:46 PM
LX_Emergency Actually Bruno. That big... 05-07-2012, 07:13 AM
MickR I also favour the one handed... 05-09-2012, 11:26 PM
shayne My edc is an ezula . Nice... 05-24-2012, 08:19 PM
scap99 EDC Knife 12-24-2012, 02:14 AM
nessmuck I that tydex.... For a necker... 12-24-2012, 03:26 AM
scap99 EDC Knife 12-24-2012, 03:28 AM
nessmuck Yep kydex..got my son a... 12-24-2012, 04:40 AM
scap99 EDC Knife 12-24-2012, 05:47 AM
Shaggy8675 I normally use these 2,... 12-24-2012, 10:37 AM
scap99 EDC Knife 12-24-2012, 08:40 PM
griff199 Kershaw Skyline. $40 on... 12-25-2012, 05:03 AM
TexasShaver I carry two. An SOG Trident... 01-05-2013, 03:03 AM
nessmuck Got this beauty from Idaho... 01-05-2013, 06:39 PM
ProudMarineDad I use my CRKT M16-14M every... 04-05-2013, 09:38 PM
Giuseppe Sorry Hirlau, I forgot to... 04-26-2013, 09:58 PM
Hirlau No , that's o.k.,,,that's an... 04-26-2013, 10:33 PM
Giuseppe (A little view of the locking... 04-29-2013, 08:45 AM
Hirlau Yes, I was interested & I'm... 04-29-2013, 12:19 PM
Giuseppe They are ! I don't know if... 04-29-2013, 02:29 PM
Hirlau Thanks Giuseppe, I'll let you... 04-29-2013, 02:38 PM
Jes I just took a look for you.... 04-29-2013, 03:46 PM
Giuseppe Oh right, if they are common... 04-29-2013, 05:11 PM
dudness Yeah guys, I'm all with the... 04-29-2013, 07:37 PM
Jes My 'EDC knife' for when I'm... 04-30-2013, 04:13 AM
Jes Has anyone tried to get a... 04-30-2013, 11:34 PM
1holegrouper Chris Reeve large Sebenza 21... 05-02-2013, 11:04 AM
Hirlau Opinel L' Hermione # 8 05-03-2013, 08:57 PM
Giuseppe Congrats Hirlau ! It's new... 05-03-2013, 09:24 PM
Slartibartfast This is my edc these days. ... 05-03-2013, 10:27 PM
Hirlau Nice looking bevel on that... 05-03-2013, 10:44 PM
Birnando My newest EDC 06-21-2013, 02:42 PM
Jes Who, what a gift! 06-21-2013, 03:28 PM
1holegrouper 133522 Here's my baby 06-21-2013, 03:45 PM
Hirlau Gotta read up on those when I... 06-21-2013, 07:10 PM
celticcrusader I've sold most of my knife... 06-21-2013, 07:20 PM
dudness Never without my Douk, ... 06-21-2013, 09:03 PM
Birnando Whoa, I loved that Moki, what... 06-21-2013, 09:29 PM
RoyalCake Well today I've got my... 06-21-2013, 09:35 PM
robenco Hi guys, nice to see razor... 06-21-2013, 09:23 PM
DarkKnight7096 Benchmade 580 Barrage... 06-21-2013, 09:47 PM
LX_Emergency much thicker than I thought... 07-11-2013, 11:17 PM
Hirlau I think it makes it a little... 07-12-2013, 12:42 AM
32t I think that you are talking... 07-12-2013, 03:09 AM
LX_Emergency Yes, the thickness of the... 07-12-2013, 06:52 AM
jaytongret I am carrying and EOD Gerber... 07-17-2013, 11:31 AM
Birnando One more 07-20-2013, 04:13 PM
shayne Cant afford a sebenza what... 07-21-2013, 01:01 AM
LX_Emergency Some elegant office stuff... 08-27-2013, 11:18 AM
LX_Emergency hahaha yeah sharpening was... 08-27-2013, 01:00 PM
Birnando A couple more from my growing... 08-27-2013, 01:43 PM
LX_Emergency NOW WE'RE TALKING! I've... 08-27-2013, 02:07 PM
Birnando I've had it for a couple... 08-27-2013, 03:52 PM
Birnando Another one 09-02-2013, 01:51 PM
Swede686 I have one like this as well... 09-09-2013, 09:38 AM
LegalBeagle Wait, you with an AD? Say it... 09-09-2013, 11:16 AM
JimmyHAD I think that is a major... 09-09-2013, 12:41 PM
Birnando Indeed it is! My... 09-09-2013, 03:21 PM
Bruno I'm dreading the answer but... 09-09-2013, 05:46 PM
LegalBeagle I can tell you, Bruno, that... 09-09-2013, 06:07 PM
stimpy52 I owned and carried one just... 09-09-2013, 06:33 PM
Birnando The build, materials used,... 09-09-2013, 06:47 PM
JimmyHAD IOW Bruno ...... if you have... 09-09-2013, 06:50 PM
cannonfodder Go big. Made this one a... 07-09-2014, 02:41 PM
MickR What steel and which mosaic... 07-09-2014, 10:23 PM
cannonfodder Run of the mill stainless... 07-11-2014, 03:36 AM
LX_Emergency They also have a rockwell... 09-09-2013, 06:30 PM
Bruno If it makes you feel any... 09-09-2013, 09:10 PM
LX_Emergency people always want something... 09-10-2013, 03:58 AM
Bruno Well no. The one about water... 09-10-2013, 05:11 AM
Spendiggity I carry a leatherman... 09-10-2013, 05:26 AM
LX_Emergency It would only save me... 09-10-2013, 05:51 AM
edhewitt But would you trade up, or... 09-10-2013, 06:10 AM
LX_Emergency Everything is task specific.... 09-10-2013, 06:21 AM
Hirlau This is how we rationalize... 09-10-2013, 01:21 PM
Bruno Well, no. At least not in... 09-10-2013, 06:31 AM
LX_Emergency So you have only one of... 09-10-2013, 06:51 AM
LX_Emergency And likewise, different... 09-10-2013, 06:54 AM
edhewitt Edward scissor hands style 09-10-2013, 07:30 PM
LX_Emergency I've got a belt don't i? 09-10-2013, 01:49 PM
TheGeek My current EDC is a... 09-27-2013, 03:53 PM
TheGeek 141723 My new EDC in my... 09-28-2013, 08:46 AM
Chacodude Favorite EDC is a Benchmade... 09-29-2013, 05:37 PM
ChopperStyle Spyderco resilience 09-29-2013, 09:20 PM
Hirlau This was my grandfather's... 10-02-2013, 02:26 AM
SublimeShave 144103144104144105144106The... 10-22-2013, 07:24 PM
HNSB From recommendations here, I... 10-23-2013, 02:45 AM
Birnando The Opinel is a darn fine... 10-23-2013, 08:27 PM
SublimeShave I love my Laguiole! I bought... 10-23-2013, 02:24 PM
HNSB Here's a pic of the modified... 10-23-2013, 02:41 PM
OCDshaver Here are my two standard... 10-23-2013, 07:33 PM
serickson87 Buck 110 forever: Edit-... 10-24-2013, 03:03 AM
DualNature My EDC is a Karambit by... 10-27-2013, 03:34 AM
Hirlau Dang son, don't fall in any... 10-27-2013, 03:57 AM
Churchwarden I like traditional folders,... 10-28-2013, 05:10 PM
mainaman Spyderco Southard- really... 10-31-2013, 01:16 AM
Boarder277 just a Dick's $40... 10-31-2013, 02:17 AM
TheGeek I would rather lie a 1 handed... 10-31-2013, 11:14 AM
mainaman You can get a slipjoint type... 10-31-2013, 12:02 PM
TheGeek Thanks mainaman, the colt... 11-02-2013, 08:27 PM
Boarder277 http://img.tapatalk.com/d/13/1... 10-31-2013, 11:54 AM
Churchwarden http://custombladeworks.files.... 11-02-2013, 08:48 PM
TheGeek I have indeed churchwarden... 11-02-2013, 09:04 PM
Churchwarden I don't know what the name of... 11-02-2013, 10:12 PM
TheGeek I'm seriously cobs9dering the... 11-03-2013, 07:52 PM
Boarder277 153571 just a Kershaw... 01-22-2014, 01:20 PM
TheGeek Had a little few extra... 01-23-2014, 05:53 PM
TheGeek And here it is. I can't speak... 01-26-2014, 01:14 AM
JaimeCobos Castor Aitor Grande 153984 01-26-2014, 01:42 AM
SS502MC I always have two one me. ... 01-27-2014, 06:01 PM
PLJ This one is from an old... 01-27-2014, 06:17 PM
SublimeShave This spike knife is sweeet!... 03-24-2014, 05:26 PM
SublimeShave This is the spike knife I mean 03-24-2014, 05:27 PM
Jsperrick I love the look of case... 03-17-2014, 02:54 AM
STR8RZR Baladeo 37 Gram Lockblade in... 03-23-2014, 10:18 PM
ncraigtrn I alternate between my bench... 05-07-2014, 07:13 PM
Lakebound Emerson CQC-7 opposite s Colt... 07-09-2014, 10:46 PM
ace Mike "Whiskers" Allen Scale... 07-09-2014, 10:50 PM
scap99 Here's my gym shorts edc... 08-06-2014, 01:08 AM
Ulricus I agree. They're definitely... 08-09-2014, 04:12 PM
Corin They are awesome. A little... 08-09-2014, 04:36 PM
earcutter So I have been playing around... 08-10-2014, 02:11 AM
Corin Sweet knife. I have a few... 08-10-2014, 08:02 AM
RoyalCake So back on post 704 I put out... 08-28-2014, 01:37 AM
Matheus 178674 Here is mine... about... 09-09-2014, 02:49 PM
Birnando It was sort of inevitable I... 09-09-2014, 03:26 PM
yardie Pulled the trigger and... 09-09-2014, 05:07 PM
miha whoaaa italian lion :).. i... 09-09-2014, 05:17 PM
Matheus Eight years on the Picket. 09-19-2021, 07:41 PM
32t The only trouble I see with... 09-19-2021, 09:02 PM
Matheus If it is a truly EDC, most... 09-19-2021, 09:14 PM
tcrideshd I guess it could , but my EDC... 09-19-2021, 09:31 PM
32t The longest I have carried... 09-19-2021, 11:22 PM
32t The shortest time I have... 09-19-2021, 11:49 PM
jfk742 I got sick of losing folders,... 09-20-2021, 12:28 AM
jfk742 Lost my last folder after... 09-20-2021, 12:34 AM
32t :cry: How does the fixed... 09-20-2021, 01:25 AM
STF I haven't asked a stupid... 09-20-2021, 10:53 AM
MikeB52 Every Day Carry knife :tu 09-20-2021, 11:17 AM
Bill31521 336061 I always have this... 09-20-2021, 12:38 PM
petercp4e 336062 Here's my EDC, a ZT... 09-20-2021, 01:27 PM
STF @outback Look what I found... 09-20-2021, 02:55 PM
outback I typically have this in my... 09-20-2021, 05:34 PM
DZEC I have the generic Home Depot... 09-20-2021, 06:12 PM
Gasman I thought I posted this... 09-20-2021, 06:46 PM
cudarunner I was gifted this by a member... 09-20-2021, 08:16 PM
32t I have carried ones like... 09-20-2021, 09:17 PM
outback Problem at my shop, everyone... 09-21-2021, 12:19 AM
Gasman I do keep my leatherman in... 09-21-2021, 12:51 AM
32t To myself an EDC should be... 09-21-2021, 12:57 AM
Matheus You are right. Must fit in... 09-22-2021, 09:53 PM
STF I like something small,... 10-11-2021, 06:09 PM
spazola That is a handy tool. I am... 10-11-2021, 07:58 PM
tcrideshd Tweezers were great to use as... 10-11-2021, 09:18 PM
Gasman That must be the thing you... 10-11-2021, 10:38 PM
cudarunner 336515 336516 10-11-2021, 10:43 PM
STF My knife is petty sharp but... 10-12-2021, 10:56 AM
tcrideshd Just like with the razor, get... 10-12-2021, 12:00 PM
STF I took your advice to heart... 10-13-2021, 11:29 AM
tcrideshd I’ll give another piece of... 10-13-2021, 12:13 PM
Bill31521 If your neighbors are like... 10-13-2021, 01:10 PM
bluesman7 I usually finish knives on a... 10-13-2021, 02:30 PM
cudarunner I concur. I rarely ever go... 10-13-2021, 08:02 PM
32t What steel does your version... 09-20-2021, 09:20 PM
petercp4e Tim, I have no idea what... 09-20-2021, 10:03 PM
randydance062449 . . . The only pocket... 09-20-2021, 10:46 PM
rolodave Same reason I carry my... 09-20-2021, 11:51 PM
LX_Emergency First off....gorgeous! ... 09-16-2014, 08:33 AM
Matheus Everyday means everyday. Two... 07-09-2016, 02:42 AM
AntiqueHoosier It's my companion.[/QUOTE] ... 07-09-2016, 03:10 PM
Matheus Still my companion 10-14-2017, 09:17 PM
Birnando It's not as much a question... 09-16-2014, 09:07 AM
LX_Emergency Oh I wasn't doubting the the... 09-16-2014, 09:14 AM
Birnando :) You know, if I were to... 09-16-2014, 11:27 AM
JimmyHAD I admire the beauty and... 09-16-2014, 01:50 PM
mglindo I agree totally. Also, it is... 09-16-2014, 03:52 PM
earcutter So a client of mine was... 10-16-2014, 01:41 AM
scap99 This one will just make you... 09-16-2014, 02:02 PM
scap99 Ain't nothing wrong with a... 10-16-2014, 01:51 AM
Hirlau It will serve the purpose of... 10-16-2014, 01:57 AM
earcutter You are right and yes you... 10-16-2014, 02:07 AM
Hirlau I watched the video,,,, if I... 10-16-2014, 02:14 AM
earcutter So I just went ahead and did... 11-02-2014, 11:16 PM
williamc I live In the UK, so my every... 10-23-2014, 07:38 PM
Hirlau Did you make those? 10-23-2014, 11:37 PM
williamc I made the bottom two... 10-24-2014, 05:58 AM
Hirlau I like the one in the middle... 10-24-2014, 06:07 AM
TheGeek Today I received a lansky... 11-06-2014, 06:35 PM
earcutter I got my Talon today! It's a... 11-07-2014, 02:25 AM
32t How does zero gravity effect... 11-07-2014, 03:23 AM
32t My edc during hunting season.... 11-07-2014, 03:39 AM
earcutter 185138 I thought I... 11-21-2014, 03:57 AM
Phrank @earcutter - that's a very... 11-21-2014, 04:11 AM
TheGeek For those of you who haven't... 11-08-2014, 08:20 PM
BotterbrodtGE http://i874.photobucket.com/al... 11-21-2014, 05:37 AM
earcutter Nice blades. Nice first post... 11-21-2014, 05:44 AM
RoyalCake Well I bought a Chris Reeves... 01-11-2015, 04:34 AM
mainaman You gonna like it. I am... 01-11-2015, 04:46 AM
RoyalCake That's the one with the... 01-11-2015, 05:04 AM
mainaman Yes, the style is called ... 01-11-2015, 06:01 AM
RoyalCake Got the lefty Wilson Combat... 01-15-2015, 01:42 AM
redtruck Didnt know Wilson Combat made... 01-18-2015, 03:51 PM
RoyalCake Thanks! I don't think they... 01-18-2015, 03:57 PM
mainaman They do not. The Sebenza is... 01-18-2015, 04:15 PM
RoyalCake Did you get your Insingo yet? 01-18-2015, 04:29 PM
mainaman Yes I did. Playing with... 01-18-2015, 04:37 PM
32t It looks like a nice knife... 01-18-2015, 04:35 PM
RoyalCake I carry a Kershaw Skyline... 01-19-2015, 02:34 AM
williamc Changing it up here is my edc... 01-19-2015, 08:46 PM
celticcrusader Here's my updated EDC since I... 01-19-2015, 08:57 PM
Birnando We are all different. I use... 01-22-2015, 02:37 PM
RoobtheLoob 191181 My EDC. My... 01-22-2015, 04:33 PM
wrxguyusa Good of you to save that poor... 01-22-2015, 06:31 PM
RoobtheLoob Haha Yes, she was quite... 01-22-2015, 06:44 PM
LX_Emergency Cool score! 01-22-2015, 04:34 PM
BlackGOLD A gentleman's blade, suitable... 03-21-2015, 12:38 AM
JDM61 Ah, yes.:tu A nice design... 03-21-2015, 05:16 PM
Thisisclog While picking up a Chosera... 04-27-2015, 08:27 PM
Phrank Very nice - what is the maker... 12-19-2015, 07:54 PM
Ernie1980 Joseph Rodgers and sons... 12-31-2015, 04:35 AM
cudarunner I've carried this for the few... 01-04-2016, 07:06 PM
BlackGOLD Thanks! It's an Al Mar Eagle... 02-29-2016, 08:26 PM
williamc 200352 Todays edc knife 05-05-2015, 04:22 PM
jfk742 I carry a BM 940 in s30v,... 05-05-2015, 05:27 PM
williamc Paired these two again, ... 05-08-2015, 09:24 PM
Haroldg48 my new one on the way: H&K... 06-30-2015, 12:57 AM
Ernie1980 http://i32.photobucket.com/alb... 07-02-2015, 12:30 AM
Phrank Ohh boy....I could see this... 07-08-2015, 08:53 PM
HNSB Been using a Puma Bobcat for... 12-10-2015, 09:38 AM
gb12549 I'm usually carrying 3... 12-10-2015, 07:53 PM
williamc New knife and pen EDC by... 12-10-2015, 08:05 PM
gb12549 That's some lovely work... 12-10-2015, 08:31 PM
Ernie1980 http://i32.photobucket.com/alb... 12-10-2015, 08:44 PM
Hirlau For sure Ernie,, that Whitler... 12-11-2015, 02:54 AM
zugbug I usually end up just using... 12-11-2015, 03:17 AM
maliboy67 EDC Knife 12-19-2015, 07:41 PM
williamc Thanks @Ernie1980 I'll look... 01-05-2016, 07:31 AM
Ernie1980 http://i32.photobucket.com/alb... 01-06-2016, 06:19 PM
williamc https://uploads.tapatalk-cdn.c... 01-06-2016, 11:19 PM
williamc Picked up this George... 01-15-2016, 11:52 PM
williamc 228194 New slipjoint in this... 02-13-2016, 10:59 PM
Ernie1980 That is a great looking... 02-21-2016, 02:34 AM
TheGeek What size is that mate? Looks... 07-22-2016, 07:06 AM
williamc It a Lanny's Clip from South... 07-23-2016, 02:50 PM
TheGeek Cheers mate. Its a grand... 07-23-2016, 02:56 PM
Bruno Is the legal length define as... 07-31-2016, 02:35 PM
TheGeek Its a touchy question lol.... 07-31-2016, 08:40 PM
TheGeek http://uploads.tapatalk-cdn.co... 02-24-2016, 08:18 PM
sqzbxr Mike Alsdorf traditional... 02-24-2016, 08:48 PM
Ernie1980 He makes some terrific... 02-24-2016, 08:53 PM
TheGeek That is a lovely knife. I... 02-24-2016, 08:58 PM
TheGeek Just a curiosity. Clearly... 02-24-2016, 09:54 PM
32t A list of why not would be... 02-24-2016, 09:59 PM
dinnermint I started with an EDC when... 02-24-2016, 10:07 PM
TheGeek Indeed heh. Feel free to... 02-24-2016, 10:03 PM
32t I won't EDC anything... 02-24-2016, 10:23 PM
TheGeek That does suck, always hurts... 02-24-2016, 10:10 PM
williamc I am as much into knives as I... 02-24-2016, 10:48 PM
32t That bottom one is... 02-24-2016, 10:58 PM
williamc I am a teacher in a... 02-25-2016, 07:37 AM
Hirlau The bottom knife looks like a... 02-25-2016, 12:44 AM
reefer Rockstead Higo... 02-25-2016, 12:52 AM
Kmcmichael Opines #4 Easy to sharpen... 02-25-2016, 01:04 AM
williamc That's it buddy a mini... 02-25-2016, 07:39 AM
ScottGoodman My company changed it's knife... 02-25-2016, 08:38 PM
Hirlau Nice sturdy looking EDC. 02-25-2016, 08:42 PM
BlackGOLD Opinel No8 with a bubinga... 03-02-2016, 04:02 PM
Phoenix51 230188 Kershaw Skyline.... 03-02-2016, 04:09 PM
32t I don't know how to make a... 03-03-2016, 03:07 AM
Hirlau I have an Opinel, love it, I... 03-03-2016, 04:05 AM
MickR I've always meant to get... 03-03-2016, 09:25 AM
williamc I have been bricklaying... 03-05-2016, 08:35 PM
kalerolf Whaha I do that also.. last... 03-06-2016, 10:29 AM
Bruno Stay away from gun control... 03-15-2016, 11:17 AM
williamc http://uploads.tapatalk-cdn.co... 03-17-2016, 09:16 PM
MW76 My Gil Hibben Pro Folder II ... 03-18-2016, 02:14 AM
Ernie1980 http://i32.photobucket.com/alb... 03-18-2016, 04:18 AM
stev Genuine drinking Victorinox... 03-18-2016, 04:50 PM
williamc 232452 Homemade friction... 03-24-2016, 09:51 PM
Hirlau Are those brass scales? 03-24-2016, 10:02 PM
stev Maybe even Copper 03-25-2016, 07:53 PM
williamc Copper scales with brass... 03-26-2016, 07:14 AM
32t Looks nice, but maybe a... 03-26-2016, 12:45 PM
LX_Emergency Thank you very much. Yes I... 04-19-2016, 04:22 PM
Ernie1980 Nice work on those knives! I... 04-20-2016, 04:32 PM
LX_Emergency It works pretty well. I have... 04-21-2016, 11:35 AM
ScottGoodman New EDC since automatics are... 04-21-2016, 06:33 PM
ScottGoodman BTW, this Kershaw is made in... 05-10-2016, 07:21 PM
redtruck What is a slip joint? Makes... 07-21-2016, 12:19 AM
williamc http://uploads.tapatalk-cdn.co... 09-27-2016, 08:27 PM
AcesandEights Kershaw Leek, is my EDC knife. 09-28-2016, 12:59 AM
Ernie1980 http://i32.photobucket.com/alb... 09-30-2016, 03:07 AM
Hirlau If that one could talk, I bet... 09-30-2016, 03:24 AM
Euclid440 Wow, that Lanny is one good... 10-04-2016, 04:13 AM
HARRYWALLY This came home with me... 10-06-2016, 10:37 PM
Hirlau I wonder what that would look... 10-06-2016, 10:50 PM
williamc New knife to carry and first... 10-10-2016, 11:38 AM
LX_Emergency I've had this Queen Cutlery... 04-26-2017, 07:36 AM
apipeguy Switched to my warm weather... 04-26-2017, 12:43 PM
Leatherstockiings This travel writing about the... 04-26-2017, 01:54 PM
JimmyHAD Another link that might be of... 04-27-2017, 12:54 AM
EMC45 Wilson Combat pistol AND... 04-27-2017, 12:14 PM
Kelenty As for me, I like kubey... 06-09-2017, 05:36 AM
TheGeek This is what I am carrying... 07-25-2017, 01:05 PM
Jlander Never leave home without them 07-25-2017, 02:02 PM
EMC45 Nice 70 Series. And ZT. 07-26-2017, 07:19 PM
mdeamicis I also have the ZT 301 but I... 08-03-2017, 03:16 AM
mdeamicis Leatherman surge with extras,... 08-03-2017, 03:22 AM
Jlander I know I'm going to sound... 08-03-2017, 01:25 PM
BotterbrodtGE EDC for work. Spyderco Native... 07-27-2017, 03:55 PM
bluesman7 I did the same thing to a... 07-28-2018, 06:52 PM
bluesman7 What's your favorite... 08-18-2018, 04:56 PM
TheGeek I am happy with my kitchen... 08-18-2018, 05:17 PM
Birnando You finish your knives on a... 08-18-2018, 08:56 PM
earcutter What do your friends say when... 08-18-2018, 09:03 PM
TheGeek I was thrown cozz I'm sure it... 08-05-2017, 08:10 PM
Jlander Looked it up on IMDB. You are... 08-05-2017, 09:25 PM
tcrideshd Carrying a Joe Calton toggle... 11-26-2018, 11:40 PM
TristanLudlow My daily carry, nothing... 11-27-2018, 12:17 AM
tcrideshd how about a... 11-27-2018, 12:26 AM
bluesman7 Joe brought a few folders to... 11-27-2018, 01:07 AM
bluesman7 I had to get a new small... 04-15-2019, 04:08 PM
jfk742 Sorry to hear that, Victor. ... 04-15-2019, 05:48 PM
sharptonn Over 40 years ago I managed... 04-15-2019, 06:02 PM
Spydercofan I’ve been carrying a spyderco... 01-02-2021, 06:19 AM
rolodave I've carried my Leatherman... 01-02-2021, 12:21 PM
redtruck There should be a 2 digit... 01-04-2021, 01:51 AM
PaulFLUS I've carried a Leatherman for... 01-04-2021, 02:04 AM
  1. 10-12-2021, 12:00 PM #11
    tcrideshd is offline
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,588
    Thanked: 1894

    Default

    Just like with the razor, get the two edges to meet in the middle, my DMT 300 and 1200 is what I use,
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to tcrideshd For This Useful Post:

    STF (10-12-2021)
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules