Thread: What are you working on?

Damn, it's got a roll bead on the top. Not sure the sanding idea would work unless you could somehow put a finished edge on the top of that thing once it was sanded.

Originally Posted by 32t

It has been a while but I have laid a bead on a beer can.

It is more of setting the machine up than your skill.

Unless one of you guys say that this brush is worth over $500 I am not going to fool with it and make it work.

If I was perfect I wouldn't be here.

I am thinking that if I used smaller grabs with the vice and rotated it more i would have had better luck.

You should do it just to show us you can.

Should I call you out??? Bet you can't do it...

I think you can...

I am thinking that if I used smaller grabs with the vice and rotated it more i would have had better luck.

Ya possibly. Or drilled it. takes longer but is effective.

Originally Posted by 32t

It has been a while but I have laid a bead on a beer can.

It is more of setting the machine up than your skill.

Unless one of you guys say that this brush is worth over $500 I am not going to fool with it and make it work.

If I was perfect I wouldn't be here.

I am thinking that if I used smaller grabs with the vice and rotated it more i would have had better luck.

You're a better man than me, every time I try tig welding it's a mess! Lol me and rig welding don't see eye to eye

Originally Posted by Dieseld

Now that's a great day

And seriously not ONE screw left?
You are astonishing sir

I figure that the more screws I have left makes me smarter than the designer!

I can TIG weld, not too good, but I can do it





Oh and that brush is only worth $499.95 so don't bother welding it

Here's to 1000 pages of projects and shared knowledge!

The odometer is about to roll over on this thread. Coming up on 10,000 posts.

EDIT; I think that xiaotuzi and I noticed this in the same instant.

Tom, my hats off to you on the Prius.
Nice...

Pete <:-}

What a busy day on this thread and I have been doing planes trains and automobiles all day. Some nice work going on.

P.S.
Tim weld the damn thing already!

Originally Posted by HARRYWALLY

You should do it just to show us you can.

Should I call you out??? Bet you can't do it...

I think you can...



Ya possibly. Or drilled it. takes longer but is effective.

If I can borrow your welder I can show you.

This was at least 30 years ago but the guy that taught me showed me that you want to get the pedal set to 99.99 percent of what will burn trough and then go from there.

What is 99.99 percent of this ferrule?

Probably burn up about 10 of them to figure it out.